Overview
The Crown Automotive 33002920 is a black serpentine harmonic balancer damper for 4.0L six-cylinder engines. It fits Jeep Cherokee, Grand Cherokee, Comanche, Wagoneer and Wrangler models, including the 2004 Wrangler LJ Unlimited.
It is not an underdriven design. It is a serpentine type, meant for a serpentine drive belt rather than a V-belt.
Key features
- Black finish
- Serpentine type for a serpentine drive belt
- Not underdriven
- 4.0L six-cylinder engine application
Serpentine belt drive basics
A serpentine belt runs a single long belt across the crankshaft, alternator, water pump and other accessories, so the damper sits in the middle of that path. Its rubber ring absorbs crankshaft vibration, which helps keep the belt steady and the accessories quiet. Because the belt has to be removed to reach the damper, belt condition and tensioner health should be checked at the same time.
Inspect the damper for wobble, rubber separation and a hub that turns independently of the outer ring. Check the belt for glazing, cracks and uneven wear, and confirm the tensioner moves smoothly without binding. When refitting, make sure the belt is seated in every pulley groove before starting the engine, since a misrouted belt can damage accessories quickly.
- Check the belt for glazing or cracks
- Test the tensioner for smooth movement
- Confirm the belt sits in every pulley groove
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 33002920 |
| UPC | 848399011555 |
| Engine | 4.0L 6 cylinder |
| Type | Serpentine |
| Underdriven | No |
| Finish | Black |
| Part description | Engine harmonic balancer damper |
Vehicle fitment
It fits Jeep Cherokee XJ (1987–2001), Comanche (1987–1992), Grand Cherokee WJ (1999–2004) and ZJ (1993–1998), Wagoneer SJ (1987–1990), Wrangler LJ Unlimited (2004), Wrangler TJ (1997–2004) and Wrangler YJ (1991–1995).
Cherokee SJ, Grand Wagoneer and Wrangler years outside the listed ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Removing the old damper generally requires taking off the serpentine belt first, so plan belt routing before disassembly. Note the belt path before starting, and follow your engine’s torque specifications when refitting the damper.
What’s included
It is the damper only, with no seal, bolts or pulley. Check the contents against your installation before starting.
















