Overview
The Crown Automotive J0945451 is a front wheel stud designed for V6 engines with front drum brakes. A wheel stud is the threaded bolt pressed into the hub that the lug nut tightens onto.
It fits the 1966–1978 Jeep CJ5 (Base, Golden Eagle, Renegade), the CJ5A, CJ6 and CJ6A, the 1966–1971 Commando, and the 1957–1964 FC150 and FC170 models.
Key features
- Fits the front axle of listed Jeep models.
- Designed for V6 engines.
- Front drum brake application
- Fits CJ5, CJ5A, CJ6, CJ6A, Commando, FC150 and FC170 models.
Replacing a worn wheel stud
A wheel stud takes the clamping load of every lug nut, so even small damage to its threads can cause a wheel to loosen. Signs of wear include stripped or crossed threads, a stud that spins when the nut is tightened, rust packed around the base, and a visible bend in the shank. Any of these means the stud should be replaced rather than reused.
When a stud is removed, inspect the hub bore it sits in and the flange for corrosion or damage. Replacing studs on the same side of the axle keeps the load even across the hub, and it is common to check the lug nuts and washers at the same time. Clean the threads and the seat before fitting the new stud, and tighten the lug nuts in a star pattern once the wheel is on.
- Check every stud on the hub, not only the broken one
- Replace damaged lug nuts along with the stud
- Recheck lug nut tightness after the first few drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0945451 |
| Also numbered | CROJ0945451 |
| Part type | Wheel stud |
| Position | Front |
| Brake type | Drum |
| Engine | V6 engine, front drum brakes |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1966–1978 Jeep CJ5 (Base, Golden Eagle, Renegade), the 1966–1968 CJ5A (Base), the 1966–1975 CJ6 (Base), the 1966–1968 CJ6A (Base), the 1966–1971 Commando (Base), and the 1957–1964 FC150 and FC170 (Base). CJ7 and Scrambler models are not covered, and CJ5 years after 1978 are not included. Confirm fit for your vehicle’s year, model and trim before ordering.
The list does not include CJ7 or Scrambler models, and no CJ5 years after 1978 are shown. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wheel studs carry wheel load, so inspect the threads and seating before installing. Press-in and removal follow the usual hub procedure for your vehicle.
What’s included
The contents are one stud. Check your existing lug nuts and washers before installing.









