Overview
The Crown Automotive A568 is a leaf spring plate for the passenger side front position, and it comes with a shock stud and nut. It fits the 1959 Jeep CJ3 and several Willys models, including the CJ-2, CJ-3 and MB.
Key features
- Passenger side front position
- Shock stud and nut included
- Direct fit for the models listed below
- Part number A568, UPC 848399050264
Leaf spring plates and shock mounts
A leaf spring plate gives the spring a fixed point to sit against, and on this model it also carries a shock stud. Because the plate takes spring load and shock force, its mounting holes and the stud matter as much as the plate itself. Look at the plate closely before fitting it, since bent edges or cracks can change how the spring and shock work.
Plates on older Jeeps often rust where they touch the spring and frame. Clean the contact surfaces, inspect the welds or rivets, and confirm the stud is tight before the shock is connected. Shock absorbers and leaf springs are usually checked at the same time, since worn springs change the load on the plate.
- Inspect the plate for cracks around the stud
- Clean rust from the spring and frame contact faces
- Check the nut is tight before connecting the shock
- Check the shock and spring when the plate is replaced
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | A568 |
| UPC | 848399050264 |
| Position | Front, passenger side |
| Included | Shock stud and nut |
| Fitment type | Direct Fit |
Vehicle fitment
It fits 1959 Jeep CJ3 (Base), 1946–1949 Willys CJ-2, 1949–1952 and 1954–1958 Willys CJ-3, and 1941–1942 Willys MB (Base).
Other CJ models and later Wrangler generations are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A leaf spring plate with a shock stud and nut.
Not included: Leaf springs and shock absorbers are not part of this item.









