Overview
The Crown Automotive J5359011 is a front left (driver side) spring plate for the Jeep CJ5, CJ7 and Scrambler. It is a factory style replacement plate with a shock mount stud and a sway bar mount stud.
The studs give the shock absorber and sway bar a mounting point on the driver side of the front spring. Part number J5359011 identifies this single plate.
Key features
- Driver side (front left) position
- Shock mount stud
- Sway bar mount stud
- Factory style replacement design
- Direct fit for the driver side front position
- On 1982–86 CJs with wide track axles, the shock mount is not used and could be cut off
Shock and sway bar studs
Shock and sway bar studs give those components a fixed anchor on the spring plate, so they carry real load during articulation and cornering. Before reusing or modifying a stud, check its threads, its welds, and the surrounding metal for cracking. A stud that has been bent or heat damaged should be replaced rather than straightened.
Stud placement matters for correct suspension geometry. If a stud is removed or relocated, the shock or sway bar will need a suitable mount elsewhere, so plan the layout before cutting. Pair the plate inspection with checks on the shock bushings, sway bar links and bolts, since these wear together and affect how the front end handles.
- Thread and weld check on each stud
- Shock and sway bar bushing wear
- Plan mounts before removing any stud
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5359011 |
| UPC | 848399064162 |
| Position | Front left (driver side) |
| Fitment type | Direct fit |
| Studs | Shock mount stud and sway bar mount stud |
Vehicle fitment
It fits these vehicles:
- 1979–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade)
- 1979–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade)
- 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR)
This list does not cover other Jeep models or years outside those shown. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
For 1982–86 CJs with wide track axles, the shock mount stud is not used and could be cut off. Check your axle width before modifying the plate.
What’s included
One driver side (front left) spring plate. Check the package contents against your installation before starting.
Not included: A passenger side plate.








