Overview
The Crown Automotive 5363421R is a front brake rotor, 7/8 inch thick, for 1978–1983 Jeep CJ5, 1978–1986 Jeep CJ7 and 1981–1985 Jeep Scrambler models. It is made for a 2 bolt caliper bracket.
Crown Automotive supplies the 5363421R individually as a direct-fit, uncoated replacement rotor.
Key features
- 7/8 inch thick
- For a 2 bolt caliper bracket
- Supplied individually
- Direct-fit replacement type
- Uncoated finish
Rotor wear and replacement
Brake rotors wear through friction, so thickness, surface condition and runout tell you when they need replacing. Uneven wear, pulsing in the pedal and a scored face are common signs. Because this rotor is uncoated, the surface can also develop light rust when the vehicle sits, which is normal and usually cleans off with the first few stops.
Rotors and pads are best replaced as a set, since new pads bed into a fresh surface more evenly. Check the caliper bracket and hardware for wear while the rotor is off, and clean the hub face so the rotor sits flat before tightening the fasteners.
- Measure thickness against the minimum stamped on the rotor
- Check for scoring, grooves and heat cracks
- Replace worn pads and hardware with the rotor
- Bed in new pads after installation
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5363421R |
| UPC | 848399042887 |
| Part type | Front brake rotor |
| Thickness | 7/8 inch |
| Caliper bracket | 2 bolt |
| Position | Front |
| Type | Replacement |
| Fit type | Direct fit |
| Coating | Not coated |
| Quantity | Sold individually |
Vehicle fitment
It fits the 1978–1983 Jeep CJ5, the 1978–1986 Jeep CJ7 and the 1981–1985 Jeep Scrambler, in the front position.
The list does not include the 1977 model year. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front brake rotor.
Not included: A second rotor for the other wheel.









