Overview
The Crown Automotive CRO52004707 is a rear left emergency brake cable for the 1990 Jeep Wrangler (YJ). It is a driver side cable that connects to the drum brake.
An emergency brake cable carries force from the parking brake lever to the rear brake assembly. This cable is a direct-fit replacement for the 1990 Wrangler YJ Base, Islander, Laredo and Sahara trims.
Key features
- Driver side, rear left position
- Connects the emergency brake to the drum brake
- Direct-fit listing for the 1990 Jeep Wrangler (YJ)
- Part number CRO52004707 for matching against the original cable
Emergency brake cable service
An emergency brake cable transfers force from the parking brake lever to the rear brake assembly, and over time it can stretch, corrode or kink. A worn cable can let the lever travel too far before holding, or the brake may not release fully when the lever is lowered. Inspect the cable sheath for cracks and the ends for rust, and check that the cable moves smoothly through its guides.
Cable replacement often goes together with checking the lever adjustment, the rear brake shoes and the cable guides, since a stiff guide can affect the cable’s movement even when the cable is new. Lubricate pivots and guides lightly with a suitable grease and keep it off the brake shoes and drum surfaces.
- Look for kinks, cracks or rust at the sheath
- Check the lever travel and release
- Replace stiff or seized guides
- Keep grease off the brake shoes
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO52004707 |
| Part type | Emergency brake cable |
| Position | Rear left |
| Side | Driver side |
| Connects to | Drum brake |
| Fitment type | Direct fit |
Vehicle fitment
Fits the 1990 Jeep Wrangler (YJ) Base, Islander, Laredo and Sahara trims.
It covers the 1990 model year only, so other YJ years and later Wrangler generations are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
The package contains one emergency brake cable. Clips, springs and other fittings should be checked against your old cable before installing.










