Overview
The Fabtech FTS71005 is a heavy-duty front tie rod assembly for 2011–2018 Chevrolet Silverado 2500 HD and 3500 HD and GMC Sierra 2500 HD and 3500 HD trucks. It is presented as a stronger replacement for a standard tie rod end, with the goal of better steering strength and longer service life.
It fits stock suspension and vehicles running the Fabtech 4 inch Ultimate System, provided the tire and wheel requirements below are met. Part number FTS71005 is the number to match when comparing this assembly with your existing tie rod.
Key features
- Heavy-duty upgrade over a standard tie rod end
- Front position
- Fits stock suspension and the Fabtech 4 inch Ultimate System
- Fits vehicles with 13.5 inch wide tires or greater
- Requires wheels with 5 3/4 inch backspace
Steering geometry and tie rods
Tie rod ends connect the steering box or rack to the steering knuckles, so they move the wheels every time the driver turns. A worn end adds play and changes toe, which can cause uneven tire wear and a wandering feel. On heavy trucks, the joints work under greater loads, so the boots, grease fittings and ball joint movement should be checked at each front-end service.
When matching a replacement tie rod, confirm the position, the fitment type and any required parts, and make sure tire size and wheel backspace suit the steering geometry you run. Changing a tie rod almost always means checking toe, so plan an alignment afterward. Tighten fasteners to the specified values and check cotter pins or jam nuts once the truck has been driven a short distance.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS71005 |
| UPC | 674866035584 |
| Position | Front |
| Fitment type | Direct fit |
| Suspension | Stock suspension and Fabtech 4 inch Ultimate System |
| Tire size | 13.5 inch wide tires or greater |
| Wheel backspace | 5 3/4 inch |
| Required part number | FTS21119 |
Vehicle fitment
Fabtech’s manufacturer fitment list covers these four trucks, all with 2011–2018 model years and the trims shown:
- 2011–2018 Chevrolet Silverado 2500 HD (High Country, LT, LTZ, WT)
- 2011–2018 Chevrolet Silverado 3500 HD (High Country, LT, LTZ, WT)
- 2011–2018 GMC Sierra 2500 HD (Base, Denali, SLE, SLT, WT)
- 2011–2018 GMC Sierra 3500 HD (Base, Denali, SLE, SLT, WT)
Light-duty Silverado 1500 and Sierra 1500 models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check tire size and wheel backspace against the figures above before installing, and have part FTS21119 available, since it is named as required. Support the truck securely before working on steering components.
What’s included
It is a tie rod assembly. Included hardware is not covered here, so check the package contents against your installation before starting.
Not included: Part number FTS21119, which is named as required.









