Overview
The Crown Automotive J0805524 is a Dana 44 axle shim kit for tapered axles on early Jeep models, including the CJ5, CJ6, Commando and Jeepster. Shims set the clearance on a tapered axle, so the kit is used during axle assembly rather than dropped in as a finished part.
It fits the 1948-1953 Willys CJ-2 and CJ-3 as well as the 1960-1971 CJ5, CJ6, Commando and Jeepster.
Key features
- Shim kit for the Dana 44 tapered axle
- Used to set axle clearance during assembly
- Direct fit for the listed CJ and Commando models
- Crown Automotive part number J0805524
Setting shim thickness
Shims on a tapered Dana 44 set the bearing position and preload, so the right thickness depends on measuring the assembly rather than guessing. The shim pack is worked in with the pinion or carrier bearings, and the clearance is checked after each change until the bearings turn freely without play. The goal is smooth rotation with no looseness when the assembly is loaded.
Keep the shims grouped as you remove them, since a set that measured correctly before disassembly is a useful reference. Shims that are bent, scored or crushed should not be reused. Tapered bearings should be clean and lubricated during the check so the reading reflects the real clearance.
- Measure the clearance before final assembly
- Keep removed shims together and labeled
- Replace bent or scored shims
- Check bearing rotation after each adjustment
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0805524 |
| UPC | 848399053760 |
| Axle | Dana 44 |
| Axle style | Tapered axle |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1960-1969 Jeep CJ5 and the 1966-1969 CJ6, the 1966-1971 Commando, the 1968-1971 Jeepster, the 1948-1949 Willys CJ-2 and the 1949-1953 Willys CJ-3.
The list does not include the Jeep CJ7 or any Wrangler model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Shim thickness has to be set by measuring the bearing clearance during assembly, because the kit alone does not set it.
What’s included
This part is a shim kit for the tapered Dana 44 axle.











