Overview
The Crown Automotive clutch kit, part 3184867K, is an 11-inch clutch for the 1972–1975 and 1980–1983 Jeep CJ5, the 1972–1975 Jeep CJ6, the 1980–1983 Jeep CJ7 and the 1981–1983 Jeep Scrambler.
The kit includes a pressure plate, a clutch disc and a release bearing. Those are the main friction and release parts of a clutch replacement, so the kit supplies them in one order.
Key features
- 11-inch clutch
- Includes pressure plate, clutch disc and release bearing
- Fits the CJ5, CJ6, CJ7 and Scrambler
- Crown Automotive part number 3184867K
Planning a clutch job
A clutch replacement is a good time to check the parts that sit behind the transmission. The pilot bearing supports the input shaft, and a worn one can make the new disc drag or chatter. The flywheel surface should be smooth and free of heat cracks, and the input shaft splines should slide cleanly through the disc hub before final assembly.
Many jobs also involve the throwout arm and its bushings, along with the rear main seal if access is already open. Replacing these small parts while the transmission is out costs little compared with a second clutch job. Keep the bolts clean, tighten the pressure plate in a crossing pattern, and use the torque values in your service manual.
- Pilot bearing condition and fit
- Flywheel surface and heat cracks
- Input shaft spline wear
- Throwout arm and bushing wear
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 3184867K |
| UPC | 848399075533 |
| Product type | Clutch kit |
| Clutch size | 11 inch |
| Includes | Pressure plate, clutch disc and release bearing |
Vehicle fitment
It fits the 1972–1975 and 1980–1983 Jeep CJ5, the 1972–1975 Jeep CJ6, the 1980–1983 Jeep CJ7 and the 1981–1983 Jeep Scrambler.
It does not fit the CJ5 from 1976 to 1979, and the CJ7 is covered for 1980–1983 only. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Clutch replacement means removing the transmission. Check the flywheel surface and the pilot bearing while the transmission is out, and make sure the 11-inch disc matches the flywheel and pressure plate.
What’s included
The kit includes the pressure plate, clutch disc and release bearing. Check the package contents against your installation before starting, including the pilot bearing and flywheel condition.







