Overview
The Centerforce DF582279 is a dual friction clutch disc and pressure plate built for high-output engines. It holds up to 90% more than OEM and engages smoothly with light pedal pressure.
No vehicle, engine size or diameter is named for this part number. It is a direct fit design, so confirm the application against the original clutch before ordering.
Key features
- Dual friction disc and pressure plate design
- Rated for up to 90% more holding capacity than OEM
- Intended for engines producing high horsepower or high torque output
- Smooth engagement and light pedal pressure
- 90 day warranty
Flywheel contact and clamp load
The clutch disc only works as well as the flywheel face it clamps against. A flat, clean, undamaged surface lets the disc engage evenly, while heat checks, grooves or a blue-tinted glaze can cause chatter, slipping and a short service life. Measuring flywheel runout and surface condition before fitting a new kit helps avoid problems that a new disc alone will not fix.
Clamp load from the pressure plate spring also matters. Too little load lets the disc slip under torque, and too much raises pedal effort and stresses the bearing and fork. High-output engines often need careful matching of the pressure plate to the disc lining. Tighten the pressure plate bolts evenly, and inspect the release bearing and pilot bearing at the same time.
- Look for heat checks and deep grooves on the flywheel
- Measure flywheel runout before assembly
- Tighten pressure plate bolts evenly
Specifications
| Brand | Centerforce |
|---|---|
| Part number | DF582279 |
| UPC | 788442018288 |
| Type | Dual friction clutch disc and pressure plate |
| Warranty | 90 day |
Vehicle fitment
No make, model or year is named for the DF582279, so fitment cannot be confirmed for a specific vehicle. Measure the original clutch disc diameter and spline count, and compare them with your engine and transmission before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Align the disc with a clutch alignment tool before bolting the pressure plate down, and check the flywheel surface before installing the disc. Work only on a vehicle that is raised and held on stands, never on a jack alone.
What’s included
Includes the clutch disc and pressure plate.








