Overview
The Centerforce DF512009 is a dual friction clutch disc and pressure plate for a 1.3L engine, with a 7.5in diameter disc and an 18-spline by 0.75in pattern. It holds up to 90% more than OEM and engages smoothly with light pedal pressure.
It is designed for engines producing high horsepower or high torque output. Confirm the engine, disc diameter and spline count match your transmission and flywheel before ordering.
Key features
- Dual friction clutch disc with pressure plate
- Holding capacity rated up to 90% above OEM by Centerforce
- Designed for high horsepower and high torque engines
- Smooth engagement with light pedal pressure
- 90 day warranty
Signs the clutch is worn
A dual friction clutch disc has two friction faces, so it can transmit more torque than a single disc of the same size. The pressure plate clamps the disc against the flywheel, and the spring load of that plate, together with the lining condition, sets how much torque the clutch can hold. The disc also has to slide freely on the input shaft splines. Worn or dry splines cause drag and chatter even when the new parts are correct.
Wear usually appears as slipping under load, a pedal that feels higher than before, a burning smell after hard driving, or shudder when pulling away. Oil from a leaking rear main seal or transmission input seal will glaze and ruin the friction material quickly, so fix leaks first. Replacing the pilot bearing, release bearing and clutch fork pivot during the same job is common, because the transmission is already out and those parts are inexpensive.
- Check the flywheel for heat cracks and scoring
- Inspect the input shaft splines for wear
- Replace the pilot bearing during the same job
Specifications
| Brand | Centerforce |
|---|---|
| Part number | DF512009 |
| UPC | 788442017649 |
| Engine | 1.3L |
| Disc diameter | 7.5in |
| Spline | 18-spline by 0.75in |
| Type | Dual friction clutch disc and pressure plate |
| Warranty | 90 day |
Vehicle fitment
No vehicle is named for the DF512009, so fitment cannot be confirmed for a make, model or year. It is a direct fit design meant to replace a matching original clutch. Check the 1.3L engine, 7.5in diameter and 18-spline by 0.75in pattern against your application.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Center the disc with a clutch alignment tool before fitting the pressure plate, and inspect the flywheel for wear before installing the new clutch. The throwout bearing is not included, so confirm a release bearing is on hand. Work with the vehicle safely supported on stands.
What’s included
Pressure plate and clutch disc.
Not included: Throwout bearing.







