Overview
The Crown Automotive Clutch Alignment Tool, part number 53010, aligns the clutch during installation. It is made for 3.8L, 4.0L or 4.2L 6 cylinder engines.
Key features
- Aligns the clutch for installation
- Suited to 3.8L, 4.0L or 4.2L 6 cylinder engines
Why clutch alignment matters
A clutch disc has to sit centered on the input shaft so the transmission can slide into place without forcing it. If the disc is off center, the splines can bind, the pilot bearing can be damaged and the disc can be pinched when the bolts are tightened. An alignment tool holds the disc in position while the bolts are started and the bellhousing is seated.
Before installing the tool, check that the pressure plate and disc are clean and free of oil. Insert the tool through the disc and into the pilot bearing, then tighten the cover bolts in a crisscross pattern. Remove the tool only after the transmission is fully seated, and check that the input shaft slides through the disc without resistance.
- Check the disc for oil before installing
- Inspect the tool shaft for bends or burrs
- Keep the pilot bearing clean and seated
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 53010 |
| UPC | 848399083569 |
| Engine applications | 3.8L, 4.0L or 4.2L 6 cylinder |
| Purpose | Clutch alignment during installation |
Vehicle fitment
Engine sizes are given, but no vehicle years, models or chassis codes are named.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the tool only with the 3.8L, 4.0L or 4.2L 6 cylinder engines named above.
What’s included
The alignment tool itself is the only item included.












