Overview
The Crown Automotive 5351302K is a clutch pedal rod kit that links the clutch bellcrank to the clutch pedal. It fits 1972–1975 Jeep CJ5 in Base and Renegade versions.
The rod is 18-5/8 inches long. Two engine groups apply: one for 3.8L, 4.2L or 5.0L engines, and one for 5.9L or 6.6L engines. Confirm which engine your vehicle has before ordering.
Key features
- Clutch pedal rod kit that links the bellcrank to the pedal
- Clutch rod listed at 18-5/8 inches long
- Two engine groups listed: 3.8L, 4.2L or 5.0L, and 5.9L or 6.6L
- It is a direct fit replacement.
Clutch linkage adjustment
The clutch rod links the bellcrank to the pedal, so any play in the linkage shows up as a clutch that engages too high or too low. Before installing a new rod kit, check the bellcrank pivot, the clevis pins and the pedal stop for wear. Replace worn bushings and pins at the same time, since a loose pivot can make a new rod feel sloppy.
Lubricate the joints with a suitable grease after assembly and check that the rod moves freely through its full travel without binding. Look for bent rods, cracked clevis ends and worn bellcrank holes, which are the usual signs the linkage needs replacing. Adjust the free play at the pedal after the parts are fitted.
- Check bellcrank pivot and pedal stop
- Replace worn bushings and clevis pins
- Adjust pedal free play after fitting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5351302K |
| UPC | 848399076943 |
| Part type | Clutch pedal rod kit (bellcrank to pedal) |
| Rod length | 18-5/8 inch |
| Engine groups | 3.8L, 4.2L or 5.0L; 5.9L or 6.6L |
| Fitment type | Direct Fit |
Vehicle fitment
It fits 1972–1975 Jeep CJ5 in Base and Renegade versions. Confirm your engine size against the two engine groups before ordering.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for CJ7 models.
What’s included
Confirm whether the bellcrank, clevis pins and bushings are needed before installing the rod kit.














