Overview
The Crown Automotive J0645662 is a bell crank spacer for a 7/8 inch shaft. It fits 1948 to 1966 Jeep CJ and Willys CJ vehicles, including CJ3, CJ5, CJ5A, CJ6 and CJ6A models.
It fits the 1948–1949 Willys CJ-2 through the 1966 CJ5A and CJ6A, with the 1959–1966 CJ5 and CJ6 included. Measure the spacer’s length, thickness and material against your bell crank before ordering.
Key features
- Spacer for a 7/8 inch shaft
- Fits Jeep CJ and Willys CJ models
- It is a direct fit.
- Part number J0645662 with UPC 848399052824
Bell crank wear and shaft fit
A bell crank spacer sits on the shaft and keeps the bell crank centered in the linkage, so it affects steering feel more than most people expect. Wear on the spacer faces or in the shaft bore can produce play, clicking or uneven steering response. Old CJ linkage often has grime and rust that hide the real condition, so clean the parts before judging them.
When fitting a new spacer, check the shaft for scoring and make sure the bell crank turns freely without binding. Tighten the fasteners to the value in your service manual and recheck after the first few drives. If the shaft is worn, replacing the spacer alone may not remove the play.
Compare the old spacer’s thickness and faces with the new one before installing, since a mismatch can change bell crank alignment.
- Check the shaft for scoring
- Clean grime from the linkage before inspecting
- Recheck fasteners after the first few drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0645662 |
| UPC | 848399052824 |
| Part type | Bell crank spacer |
| Shaft size | 7/8 inch |
| Fit type | Direct fit |
Vehicle fitment
It fits these vehicles:
- 1959–1960, 1966 Jeep CJ3 (Base)
- 1959–1966 Jeep CJ5 (Base)
- 1966 Jeep CJ5A (Base)
- 1959–1966 Jeep CJ6 (Base)
- 1966 Jeep CJ6A (Base)
- 1948–1949 Jeep Willys CJ-2
- 1949–1958 Jeep Willys CJ-3
- 1955–1958 Jeep Willys CJ-5
- 1956–1958 Jeep Willys CJ-6
The CJ7 and Jeep CJ5 and CJ6 years from 1967 onward are not included. Confirm your vehicle’s year, model and trim before ordering.
What’s included
It covers the bell crank spacer only.









