Overview
The Crown Automotive 83500565 is a 3rd and 4th gear synchronizer plate for AX4 and AX5 manual transmissions. Quantity three is required for the 3rd and 4th position.
It fits 1984–1988 Jeep Cherokee (XJ) and 1986–1988 Jeep Comanche vehicles.
Key features
- 3rd and 4th gear synchronizer plate for AX4 and AX5 transmissions
- Quantity three required
- Part number 83500565 with UPC 848399023657
- It is a direct fit for the Cherokee XJ and Comanche models in the trims shown.
Gear position and plate sets
The 3rd and 4th gear plate works alongside the other synchronizer plates, but it carries load from the sleeve whenever the driver moves between those two gears. Wear shows up as slow engagement, a crunch on upshifts, or a gear that feels loose when the vehicle is warm.
When fitting a new set, make sure the gear position matches the plate you ordered, since 1st and 2nd gear parts are a separate item. Check the cones and the sleeve for wear at the same time, and have the work done by a technician comfortable opening a manual gearbox.
- Confirm the gear position before ordering
- Inspect the cones for scoring or flat spots
- Check the sleeve for free movement
- Replace worn rings with the plates
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 83500565 |
| UPC | 848399023657 |
| Transmission | AX4, AX5 |
| Position | 3rd and 4th gear |
| Quantity required | Three |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–1988 Jeep Cherokee (XJ), with Base, Chief, Laredo, Limited and Pioneer trims, and the 1986–1988 Jeep Comanche, with trims including Base, Chief, Custom, Eliminator and Laredo.
Cherokee years after 1988 and Comanche years outside 1986–1988 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan on three plates per job and have a technician open the transmission for the swap.
What’s included
Synchronizer plates in the stated quantity of three, for the 3rd and 4th gear position.












