Overview
The Omix-ADA 18886.16 is a third and fourth synchronizer key plate for AX4 and AX5 transmissions. It fits the 1984 to 1988 Jeep Cherokee XJ and the 1987 to 1988 Jeep Wrangler YJ, across several trims for each model.
The plate sits in the third and fourth gear section of the AX4 or AX5, where it locates the synchronizer inside the gearbox. It is built to original Jeep specifications.
Key features
- Third and fourth gear synchronizer key plate for AX4 and AX5 transmissions
- Fits 1984 to 1988 Cherokee XJ and 1987 to 1988 Wrangler YJ applications
- Built to original Omix-ADA specifications.
- Omix-ADA part number 18886.16 with UPC 804314060510
Before you open the gearbox
A synchronizer key plate sits in a groove on the synchronizer hub and holds the synchronizer in place as the shift collar moves. When those plates wear, the synchro can lose its grip on the gear, leading to grinding or hard shifts into third and fourth. Worn keys often show as a notch or flat edge on the contact surface, and the gears themselves may show matching wear. Inspect the hub, sleeve and gear cones at the same time, because a worn key plate can damage parts that otherwise look fine.
On an AX4 or AX5 with high mileage, replacing the plates is usually part of a rebuild, so clutch, bearings and seals are often addressed in the same job. Keep the gearbox oil at the level and grade the transmission requires, and check for leaks after the first drives. Confirm fit for your vehicle’s year, model and trim before ordering, and bring the old plate to the shop for comparison.
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18886.16 |
| UPC | 804314060510 |
| Transmission | AX4 and AX5 |
| Gear positions | Third and fourth synchronizer |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 1984–1988 Jeep Cherokee (XJ) in Base, Chief, Laredo, Limited and Pioneer trims, and the 1987–1988 Jeep Wrangler (YJ) in Base, Laredo, S, Sahara and Sport trims.
Cherokee model years outside 1984 to 1988, and Wrangler TJ and later models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing this plate means opening the AX4 or AX5 gearbox to reach the synchronizer assembly. Plan on a transmission shop or an experienced rebuilder for the job.
What’s included
The product describes one third and fourth synchronizer key plate, part number 18886.16.
Not included: Other synchronizers, gears and transmission components are not part of this package.









