Overview
The Crown Automotive 83500564 is a 1st and 2nd gear synchronizer plate for AX4 and AX5 manual transmissions. Quantity three is required, so three plates are needed for the job.
It fits the 1984–1990 Jeep Cherokee (XJ).
Key features
- 1st and 2nd gear synchronizer plate for AX4 and AX5 transmissions
- Three are needed for each job.
- Part number 83500564 with UPC 848399023640
- It is a direct fit for 1984–1990 Cherokee XJ vehicles in the trims shown.
Why the plates come in threes
The synchronizer plate on the first and second gear position works with the hub and sleeve to bring the gear up to speed before it engages. When it wears, the sleeve can take longer to synchronize, which is most noticeable on cold starts and when shifting quickly under light throttle.
Plates are usually replaced as a set because the same wear pattern tends to appear across the positions in the gearbox. A technician who opens the unit will normally check the hub, rings and sleeves alongside them, then set the new parts in the same order the old ones came out.
- Keep the plates in their original order
- Inspect the friction faces for scoring
- Confirm the hub and sleeve are not cracked
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 83500564 |
| UPC | 848399023640 |
| Transmission | AX4, AX5 |
| Position | 1st and 2nd gear |
| Quantity required | Three |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–1990 Jeep Cherokee (XJ) with Base, Chief, Laredo, Limited, Pioneer and Sport trims.
Cherokee years after 1990, Comanche models and Wrangler are outside this coverage. Confirm year, model and trim against your vehicle before ordering.
Installation notes
Three plates are required for each job, and the swap means opening the transmission. A qualified transmission technician should handle the installation.
What’s included
One 1st and 2nd gear synchronizer plate line item, with quantity three required for installation.












