Overview
The FUEL Off-Road Coupler D575 20×9 with part number MHTD57520901750 is a 20-inch aluminum spoke wheel built for an 8 on 170 bolt pattern. It is 9 inches wide, with an offset of 1, a backspacing of 5 and a 125 center bore, in a gloss black finish.
The wheel is built for trucks and SUVs and is a universal fit design. The bolt pattern and center bore are the main checks against a given vehicle, so match them to your hub before choosing this wheel.
Key features
- Spoke design in a 20-inch diameter and 9-inch width
- Bolt pattern 8 on 170
- 125 center bore
- Offset of 1 and backspacing of 5
- Gloss black finish over aluminum
Lug pattern and hub-centric fit
An 8 on 170 pattern is found on heavier trucks and SUVs, and it has less tolerance for mismatch than smaller patterns. Eight studs share the load, but every stud must sit exactly where the wheel expects it. Measure from one stud center across to the opposite stud for a six-lug or eight-lug pattern, and compare that figure carefully before ordering.
The 125 center bore is the other key fit point. A wheel that centers on its bore rather than on the lug studs runs more smoothly and reduces vibration. When the bore is larger than the hub, a hub-centric ring fills the gap. Check that any ring seats flat and that the wheel sits square before tightening.
- Verify the hub is 8 on 170 before ordering
- Confirm the 125 center bore seats on the hub
- Use hub-centric rings only when the size matches
- Torque in a star pattern
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD57520901750 |
| Style | Spoke |
| Construction | Aluminum |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Offset | 1 |
| Backspacing | 5 |
| Center bore | 125 |
| Bolt pattern | 8 on 170 |
| Finish | Gloss black |
| Fitment | Universal fit |
Vehicle fitment
The wheel is universal fit, with no year, model or chassis code named. Check the 8 on 170 bolt pattern and the 125 center bore against your vehicle before choosing this wheel.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Verify that the hub is an 8 on 170 pattern and that the 125 center bore seats correctly before mounting. Check clearance to brake calipers and suspension at an offset of 1.
What’s included
Only one wheel comes with this part. Confirm whether lug nuts, caps or valve stems are supplied before mounting.









