Overview
The FUEL Off-Road D546 Assault 17×9 with a 5 on 4.5 bolt pattern is a black milled aluminum wheel, part number MHTD54617902650, with a mesh-style face. It is 17 inches in diameter and 9 inches wide, with a 1 offset, 5 backspacing and a center bore of 78.
Two bolt pattern entries are given: 5 on 4.5 and 5 on 4.5/114.3. The second entry adds 114.3 beside the 4.5 measurement, so it is the one to check against a hub that uses that size. Pick the pattern your vehicle actually runs before comparing any other figure.
Key features
- Mesh-style face in a black milled finish
- Aluminum construction
- 17-inch diameter with 9-inch width
- Offset of 1 and backspacing of 5
- Center bore of 78 and two listed bolt pattern entries
Matching the hub before mounting
Start by matching the hub to a single bolt pattern. Five-lug hubs can look similar at a glance, but a small difference in stud spacing prevents the wheel from seating properly. Measure from the center of one stud to the center of the stud farthest from it, then compare the result with the wheel’s pattern before ordering.
The mesh-style face and milled finish are mostly cosmetic, but the openings collect road grime. A soft brush and mild wheel cleaner keep milled areas clear. Avoid abrasive pads, which can scratch the milled finish and leave bright lines. Offset of 1 and backspacing of 5 place the mounting face near the centerline, but brake caliper clearance still needs checking, especially with larger brakes or wider tires.
- Confirm the hub bolt pattern before ordering
- Check caliper clearance through the mesh openings
- Re-torque lug nuts after the first few drives
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD54617902650 |
| Style | Mesh |
| Finish | Black milled |
| Construction | Aluminum |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Offset | 1 |
| Backspacing | 5 |
| Center bore | 78 |
| Bolt pattern | 5 on 4.5 |
| Second bolt pattern | 5 on 4.5/114.3 |
| Fitment label | Universal Fit |
Vehicle fitment
No vehicles are named for this wheel. The Universal Fit label is not a vehicle match, so the 1 offset and 5 backspacing must be checked against the truck or SUV in question.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the hub to one bolt pattern exactly, since 5 on 4.5 and 5 on 4.5/114.3 are given as separate entries and should be checked on the hub itself. A 1 offset keeps the mounting face near the centerline, but brake and suspension clearance still needs checking before the wheel goes on.
What’s included
Only the wheel is described. No tire, lug hardware or center cap is named.
Not included: mounting tire and lug hardware.









