Overview
The Corbeau Baja JP Wide Suspension Seat in black vinyl (part number 26401WS) is a wide stationary high back seat for the front position. It fits the 1976-1983 Jeep CJ5, 1976-1986 Jeep CJ7, 1981-1985 Jeep Scrambler and 1987-1995 Jeep Wrangler (YJ). It bolts directly to most CJ5s and all CJ7s and YJs, so it suits owners who want a wide suspension-style seat with harness slots.
The Baja JP is based on the Baja SS seat, with a flat mounting surface on the bottom, a different stitch pattern and two harness slots in the back. Because of the flat base, no Baja Adapters are needed when mounting to a flat surface or to Corbeau brackets. The seat can be used in other vehicles with Corbeau Custom Brackets, and it accommodates up to a 42 inch waist line.
Key features
- Wide stationary high back design
- Flat mounting surface on the bottom
- Two harness slots in the back
- Different stitch pattern from the Baja SS.
- Fits waist lines up to 42 inches
- Can be used in other vehicles with Corbeau Custom Brackets
Harness and belt setup
Two harness slots in the back of a wide high back seat are there to route a harness, and they should be used with the harness anchors in mind. Check the belt and harness path against the roll bar or frame before mounting. Keep harness webbing free of pinches and wear points, since an unnoticed rub can weaken it over time.
Mounting a seat with stock brackets or a flat base changes how the belt sits, so test the belt position before finishing the install. If a bracket is used to level the seat, confirm that the belt anchors still line up. Periodically inspect the seat base and mounting bolts, especially after off-road use.
- Route harnesses before mounting
- Check harness anchor alignment
- Inspect bolts after off-road use
Specifications
| Brand | Corbeau |
|---|---|
| Part number | 26401WS |
| Product type | Wide stationary high back suspension seat |
| Seat location | Front |
| Color | Black |
| Material | Vinyl |
| Harness slots | Two, in the back of the seat |
| Waist size | Up to a 42 inch waist line |
| Fitment type | Direct Fit |
Vehicle fitment
It fits 1976-1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited and Renegade), 1976-1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade), 1981-1985 Jeep Scrambler and 1987-1995 Jeep Wrangler (YJ) models.
Later Wrangler generations such as the TJ and JK are outside this fit. Other vehicles can take the seat with Corbeau Custom Brackets. Check your year, model and trim before ordering.
Installation notes
Stock CJ mounting brackets have a steep angle, which can put the seat in an extreme reclined position. Corbeau mounting brackets can level the seat back out if the factory position is uncomfortable. Check the seat angle before tightening the mounts.
What’s included
One Corbeau Baja JP wide suspension seat in black vinyl. Brackets and other hardware are not part of the package.
Not included: Corbeau custom brackets are recommended for leveling the seat on stock CJ brackets and for other vehicles, and they are not part of this seat.











