Select your vehicle

Corbeau Ford Seat Bracket with Slider – D272

Corbeau

Shop Corbeau Seat Mounting Brackets on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Corbeau D272 seat bracket with slider, part CBUD272
  • Ties to Corbeau seats; other brands not supported
  • Title references Ford, but no model years are listed
  • Adjustable slider for fore and aft seat movement

Description

Overview

Corbeau’s D272 seat bracket with slider, part number CBUD272, is a mounting piece for Corbeau seats. The title refers to Ford, but no year range or chassis code is tied to it, so a specific Ford application cannot be confirmed.

A seat bracket is the part that lets an aftermarket seat fit properly, and an incorrect bracket causes trouble during installation and later use. This bracket includes a slider and is made for Corbeau seats only. The slider provides fore and aft adjustment once the seat is in place.

Key features

  • Slider for fore and aft seat adjustment
  • Designed only for Corbeau seats
  • Universal fit category, with no vehicle list
  • Aftermarket seat bracket under one part number

Sliders and seat alignment

Fore and aft sliders let the seat position change after it is mounted, which helps drivers of different heights set reach and pedal distance. The slider track carries the seat’s weight and passenger loads, so its rails and locks need to stay tight and free of play over time.

Alignment comes first. A bracket that sits off center can cause the slider to bind or the seat to tilt. Set the seat in its center position, mark the floor mounts, and confirm the rails run parallel before tightening the bolts.

Check the slider lock often, especially after climbing in and out. Any seat movement under braking is a sign of a worn lock or loose fasteners. Recheck bolts after the first drives, and replace worn rails rather than shimming them.

  • Center the seat before marking mounts
  • Confirm the rails run parallel
  • Check slider lock after each trip
  • Replace worn rails rather than shimming

Specifications

Brand Corbeau
Part number CBUD272
Type Seat bracket with slider
Seat brand Corbeau
Fitment Universal fit

Vehicle fitment

No specific vehicle or year range is tied to this bracket. Its fitment category is universal, but it is built for Corbeau seats, so match it to the seat first and then to the vehicle floor.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

The bracket is the item covered here, with no hardware included.

Not included: a Corbeau seat, needed to complete the assembly.

Questions & Answers

What is Corbeau D272 part CBUD272?

It is a Corbeau seat bracket with slider, identified by part number CBUD272. It is designed to work with Corbeau seats, and the slider lets the seat move forward and back.

Which vehicles does the D272 bracket fit?

No specific vehicle is tied to it. The title refers to Ford, but without model years or chassis codes the fit cannot be verified, so check it against your seat's mounting points first.

Can it be used with seats from other brands?

No. This bracket is made for Corbeau seats and is not the match for seats from other makers. If your seat comes from another maker, choose a bracket designed for that seat instead.

Can I add a slider bracket to a seat that does not have one?

Only if the bracket is built for that seat design and the floor mounting points allow it. Fitting a slider to a seat not made for it can misalign the rails. Check the seat's mounting points against the bracket before buying.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Corbeau Seat Mounting Brackets on Amazon