Overview
The Corbeau Baja JP Seat in black, part number 26401PR, is a stationary highback front seat in black vinyl, sold as a pair. It has a flat mounting surface on the bottom, a different stitch pattern from the Baja SS and two harness slots in the back, so no Baja adapters are needed on a flat surface or with Corbeau brackets.
It is designed as a direct bolt-in for most CJ5 models, all CJ7 models and YJ Wrangler models, and it fits other vehicles with Corbeau custom brackets. It fits up to a 38 inch waist line and has lowered bolsters that keep the driver in place while allowing easy entry and exit.
Key features
- Flat mounting surface on the bottom, so no Baja adapter is needed on a flat surface
- Two harness slots in the back, with slots for up to a 5 point harness
- Lowered bolsters for easy entry and exit
- Bolts onto factory slider or seat bracket without an adapter
- Stationary highback design
- Copy of the Baja SS seat with a different stitch pattern
Choosing a mounting setup
Mounting a seat to a factory slider or bracket is often the quickest route, but factory geometry was not designed around a modern suspension or a bolt-in seat. The bracket sets the seat angle, and that angle decides how upright the back sits and how the bolsters hold the driver. Choosing the right bracket is therefore a question of fit and comfort together.
Before installing, check the slider or bracket for wear, cracks and loose welds. Confirm the seat sits level and that the harness slots line up with the anchor points. Recheck the bolts after the first few drives, since a classic vehicle’s floor can flex. A flat mounting surface simplifies the setup, but the seat should still be checked for stability.
- Inspect factory brackets for cracks before reuse
- Recheck seat recline and bolts after initial drives
Specifications
| Brand | Corbeau |
|---|---|
| Part number | 26401PR |
| UPC | 70000617745 |
| Seat type | Stationary highback |
| Seat location | Front |
| Color | Black |
| Upholstery | Black vinyl |
| Harness slots | Two, for up to a 5 point harness |
| Waist fit | Up to 38 inch |
| Mounting | Bolts onto factory slider/seat bracket, no adapter required |
| Quantity | Sold as a pair |
Vehicle fitment
Fitment covers the 1976 to 1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), the 1976 to 1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade), the 1981 to 1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR), and the 1987 to 1995 Jeep Wrangler YJ (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport).
Wrangler TJ, LJ and later generations are not covered by this fitment. For CJ5 or CJ7 years outside the ranges above, confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The factory CJ mounting brackets have a steep angle, which puts the seat in an extreme reclined position when bolted to them. Corbeau’s own mounting brackets level the seatback when that recline is uncomfortable.
What’s included
The seats are sold as a pair, with a flat mounting surface and two harness slots in the back.
Not included: Corbeau custom brackets, used for leveling the seat or for vehicles other than CJ and YJ models.


















