Overview
The Corbeau Baja 36 Inch Bench Suspension Seat in black, part number 63402B, is a 36-inch-wide rear bench with a suspension base for off-road driving. It fits Jeep CJ5, CJ6, CJ7, Scrambler, Wrangler LJ, Wrangler TJ and Wrangler YJ models, with details in the fitment section below.
Corbeau built the Baja Bench for drivers who want suspension protection on rough terrain without giving up comfort. The base is reinforced with nylon and laced with military grade suspension cords that absorb impact energy and keep the ride softer over uneven ground. Black vinyl and vinyl/cloth upholstery and a powder-coated steel frame give the seat a rugged, trail-ready finish.
Key features
- Suspension system with military grade suspension cords laced through a nylon-reinforced seat base
- Designed to absorb impact energy on rough, off-road terrain
- Extra durable automotive grade cloth and vinyl upholstery with UV inhibitors
- Extensively tested under extreme conditions and found to be colorfast
- Extra strong, lightweight, powder-coated tubular steel frame
- Lap belt capability
Rear bench care and checks
A suspension bench spends its life moving, so the base and cords deserve regular attention. Look for sagging cords, cracked nylon around the base, and loose attachment points after several trail sessions. A seat that sits lower on one side or squeaks under load usually needs its fasteners checked before anything else.
Because this is a rear seat, the mounting has to stay secure whether or not anyone is sitting in it. Check the bracket bolts and floor hardware at each service interval, and keep the seat clear of loose gear that could shift forward in a stop. Wipe vinyl and cloth clean with mild soap, and let the upholstery dry fully before reinstalling any cushions. Replacing worn cords or brackets early is usually cheaper than repairing a damaged base.
Specifications
| Brand | Corbeau |
|---|---|
| Part number | 63402B |
| UPC | 70000426874 |
| Seat width | 36 inches |
| Seat type | Stationary highback |
| Seat location | Rear |
| Color | Black |
| Upholstery | Black vinyl/cloth |
| Frame | Powder-coated tubular steel |
| Suspension | Military grade suspension cords in a nylon-reinforced base |
| Lap belt | Capable |
| Bracket for CJ and YJ | B36001 |
Vehicle fitment
Corbeau’s manufacturer fitment list includes these vehicles: Jeep CJ5 (1959–1983), CJ6 (1959–1975), CJ7 (1976–1986), Scrambler (1981–1985), Wrangler LJ (2004–2006), Wrangler TJ (1997–2006) and Wrangler YJ (1987–1995).
The JK, JL, Cherokee and Gladiator are outside the covered models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
For CJ and YJ Jeeps, bracket part number B36001 is used to bolt the seat in. Other applications may need additional mounting brackets, so confirm the bracket and bolt pattern match your vehicle before starting.
What’s included
The seat itself is the item covered here. Bracket B36001 is used for CJ and YJ installs; check the package contents against your installation before starting.
Not included: Additional mounting brackets may be needed for applications beyond CJ and YJ, so check the fit before starting.




















