Overview
The Corbeau Baja 36 Inch Bench Suspension Seat in black, part number 63401, is a 36 inch wide bench seat with a suspension system made for off-road use. Corbeau designed it for drivers who want the protection of a suspension seat without giving up the comfort the brand is known for. Corbeau names Wrangler and CJ Jeeps as applications, and bolt-in use in CJ and YJ Jeeps relies on bracket part number B36001.
The bench sits on a nylon-reinforced base with military grade suspension cords laced through it. The suspension helps absorb impact energy on rough trails and gives a softer ride when conditions are rough. The black vinyl covers a powder coated steel frame, and the seat has lap belt capability.
Key features
- 36 inch bench width
- Military grade suspension cords inside a nylon-reinforced base
- Suspension designed to absorb impact energy for rough off-road driving
- Automotive grade vinyl with UV inhibitors
- Powder coated tubular steel frame
- Lap belt capability
- Bolt-in use for CJ and YJ Jeeps with bracket B36001
Off-road seat safety basics
A bench seat on an off-road vehicle takes repeated impacts through the floor and frame, so the way it is mounted and belted matters as much as its comfort. Suspension seats absorb some of that energy, but the mounting hardware and belt anchors still need to be sound. Setting the seat up properly is the first step toward a safe trail setup.
Check bolts and brackets after rough trips, and look for cracks around the frame welds and the suspension base. Keep lap belts clean and free of damage, and replace them after a hard impact. Cords and foam should be inspected for wear where they flex most. Wipe the vinyl clean and let it dry before storing the vehicle.
Specifications
| Brand | Corbeau |
|---|---|
| Part number | 63401 |
| UPC | 70000426873 |
| Width | 36 inch |
| Upholstery | Black vinyl |
| Frame | Powder coated tubular steel |
| Suspension | Nylon-reinforced base with military grade suspension cords |
| Belt capability | Lap belt |
| Seat location | Rear |
| Seat type | Stationary highback |
| Fit type | Direct Fit |
| Mounting bracket | B36001 for CJ and YJ bolt-in |
Vehicle fitment
Wrangler and CJ Jeeps are the named applications, and bolt-in use in CJ and YJ Jeeps relies on bracket B36001. Other vehicles may need additional mounting brackets, so confirm your year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bolt-in installation to CJ and YJ Jeeps uses bracket part number B36001. For any other vehicle, additional mounting brackets may be needed, so confirm the brackets and floor mounting points before you start. Have a qualified installer check that the seat and its lap belt are secured to the vehicle structure.
What’s included
One Baja 36 inch bench suspension seat in black vinyl with a powder coated steel frame.
Not included: Mounting bracket B36001 for CJ and YJ bolt-in, plus any additional brackets other applications may require.




















