Overview
The AEM 21-767C is a cold air induction system for the 2011–2018 Ford Explorer in the Base, Limited and XLT trims. It includes a Dryflow air filter, aluminum tubing and clamps. The tubing is low restriction, and the system is estimated to gain 7 HP at 5800 RPM.
The Dryflow filter is washable, reusable and oil-free, and it lasts up to 100 000 miles before cleaning is required. The system is manufactured and assembled in the USA.
Key features
- Low restriction tubing
- Dryflow air filter with washable, reusable oil-free filter media
- Filter lasts up to 100 000 miles before cleaning is required
- Estimated 7 HP gain at 5800 RPM
- Comprehensive installation instructions included
- Limited lifetime warranty
- Manufactured and assembled in the USA
Living with a cold air system
Cold air induction systems draw air from outside the engine bay, which tends to be cooler and denser than air trapped near the hot engine. The filter does the work of keeping dirt out, so its condition matters more than most people expect. Dust that gets past a worn filter can reach the mass airflow sensor and intake walls, so inspect the filter whenever you check the rest of the air path.
Oil-free filter media is cleaned by washing and drying, not by oiling, so keep cleaning products that leave residue away from the element. Aluminum tubing is light and holds its shape well, but it can crack at clamp points if overtightened, so set each clamp snugly rather than cranking it down. Check connections again after the first few weeks of driving.
- Wash and dry the filter when it looks dirty
- Avoid oil on oil-free media
- Check clamps at tubing joints
- Look for dust on the sensor after cleaning
Specifications
| Brand | AEM |
|---|---|
| Part number | 21-767C |
| UPC | 24844361431 |
| Filter | Dryflow, oil-free filter media |
| Washable and reusable | Yes |
| Filter life | Up to 100 000 miles before cleaning is required |
| Tubing | Low restriction |
| Estimated gain | 7 HP at 5800 RPM |
| Warranty | Limited lifetime |
| Made in | USA |
| Fitment type | Direct fit |
Vehicle fitment
The system fits the 2011–2018 Ford Explorer in Base, Limited and XLT trims.
Other Explorer generations and other Ford models are not covered. Verify your year, model and trim before ordering.
Installation notes
AEM includes comprehensive installation instructions with the kit, which cover the aluminum tubing, clamps and Dryflow filter. Follow those instructions for the fit.
What’s included
The kit includes a Dryflow air filter, aluminum tubing and clamps, along with installation instructions.









