Overview
The AEM 21-8305DC is a Brute Force air intake system with a silver powdercoated finish, built as a cold-air intake with a dry synthetic filter. The kit is designed to raise engine airflow and can gain up to 13.3 horsepower.
The DryFlow synthetic filter is dry media that never needs oiling. It sits in a partial enclosure housing and draws air through an included inlet tube. The system meets CARB and Federal emissions requirements under CARB Executive Order D-670. Confirm fit for your vehicle before installing the kit.
Key features
- DryFlow synthetic filter that AEM says never needs oiling
- Cold-air intake type with an included inlet tube
- Partial enclosure filter housing
- Silver powdercoated finish
- Complete hardware in every kit
- Steel heat shield and reinforced brackets are included.
- Meets CARB and Federal emissions requirements
Dry filter care and inspection
Dry DryFlow style filters are cleaned by removing loose debris and inspecting the element, rather than by oiling. Work gently, since the media can tear if it is shaken or washed too hard. If the element shows damage or stays dirty after cleaning, replace it. Keep spare clamps and hardware on hand, since a loose connection is the most common cause of intake problems after an install.
Partial enclosure housings protect the filter from road spray while keeping airflow open. When fitting any intake, check that the inlet tube does not rub against bodywork or wiring. Vibration can wear through a hose quickly, so route the tube with clearance and secure it at each bracket.
- Clean dry elements by removing loose debris
- Replace the element if it is torn
- Check the inlet tube for rubbing
- Keep spare clamps on hand
Specifications
| Brand | AEM |
|---|---|
| Part number | 21-8305DC |
| UPC | 840879014407 |
| Finish | Silver powdercoat |
| Filter type | Dry, DryFlow synthetic |
| Filter housing type | Partial enclosure |
| Intake type | Cold air |
| Inlet tube | Included |
| Power gain | Up to 13.3 hp |
| Emissions | Meets CARB and Federal; CARB E.O. #: D-670 |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes the inlet tube and the complete hardware AEM says comes in every kit, including a steel heat shield and reinforced brackets.
Not included: AEM1-4001 prefilter, which is sold separately.









