Select your vehicle

AEM Brute Force Air Intake System – 21-8314DC

AEM

Shop Jeep Wrangler JK Air Intake Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2007–2010 Jeep Wrangler JK; not CARB compliant for 2011 JK models
  • AEM Brute Force intake, part 21-8314DC, silver powder coated
  • Stated gain of 8.17 horsepower; CARB E.O. number D-670-6
  • Dry DryFlow synthetic filter that never needs oiling

Description

Overview

The AEM 21-8314DC is a silver powder coated Brute Force intake system with a dry DryFlow filter. It is built for 2007 through 2010 Jeep Wrangler JK models and meets CARB and Federal emissions requirements for those years.

The kit delivers an 8.17 horsepower gain and carries CARB E.O. number D-670-6. A steel heat shield and reinforced brackets are part of the design. It is not CARB compliant for 2011 Wrangler JK models.

Key features

  • Stated gain of 8.17 horsepower
  • DryFlow synthetic filter that never needs oiling
  • Silver powder coated finish
  • Meets CARB and Federal emissions for 2007 through 2010 Wrangler JK models
  • Not CARB compliant for 2011 Wrangler JK models
  • Inlet tube included

Before you buy

A cold air intake changes how the engine breathes, so the fit and the emissions status matter as much as the horsepower figure. Start by matching your vehicle’s model year, body style and trim to the years this kit covers. Emissions-compliant intakes are tied to specific model years, and a kit that works for one year may not be legal for the next.

Dry synthetic filters like the DryFlow element on this kit never need oiling, which removes one common maintenance step. Still, the filter should be inspected at regular service intervals and replaced when it is dirty or torn. A cracked or loose intake tube can let unfiltered air reach the engine, so check the couplings after each install and after rough trail use.

  • Confirm your model year against the emissions years before ordering
  • Inspect the filter and tube connections at each oil change
  • Check that the heat shield clears the exhaust and wiring
  • Re-tighten clamps after the first few drives

Specifications

Brand AEM
Part number 21-8314DC
UPC 840879017132
Product line Brute Force air intake system
Finish Silver powder coated
Filter type Dry synthetic (DryFlow)
Inlet tube Included
Power gain 8.17 horsepower
CARB E.O. number D-670-6
Emissions compliance 2007 through 2010 Wrangler JK
Fitment type Direct fit

Vehicle fitment

It fits 2007 through 2010 Jeep Wrangler JK models, based on its emissions compliance for those years. It is not CARB compliant for 2011 JK models, and no TJ, LJ or JL Wrangler applications are included.

Confirm fit for your vehicle’s year, model and trim before ordering, since the listed years come from emissions compliance.

What’s included

The inlet tube is included.

Not included: AEM1-4001 prefilter, sold separately.

SKU: AEM21-8314DC Category:

Specification

Shipping weight 10.00 lbs
Package dimensions 30.00 × 12.00 × 8.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK) likely fits2007–2010All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What is the AEM 21-8314DC?

The AEM 21-8314DC is a silver powder coated Brute Force intake system with a dry DryFlow filter and a stated gain of 8.17 horsepower. Part number 21-8314DC and UPC 840879017132 identify this kit.

Does the AEM 21-8314DC fit a 2011 Jeep Wrangler JK?

No, not for 2011 models. The kit is not CARB compliant for 2011 Jeep Wrangler JK models. It meets CARB and Federal emissions requirements for 2007 through 2010 JK models.

What CARB number is on the AEM 21-8314DC?

The CARB E.O. number is D-670-6. The kit meets CARB and Federal emissions requirements for 2007 through 2010 Jeep Wrangler JK models.

Do I need to oil the DryFlow filter?

No. The DryFlow filter is a dry synthetic element and does not need oiling. Clean or replace it when it looks dirty or restricted, and avoid washing it with oil-based products.

Should I replace the intake tube when adding other engine upgrades?

Not always, but check the tube and connections whenever other intake or engine parts change. Upgrades that alter airflow can put new stress on couplings, so inspect them for cracks or loose clamps after installation.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Air Intake Kits on Amazon