Overview
The AEM Brute Force Air Intake System, part number AEM21-8222DP, is a cold air intake kit for the 2009–2010 Dodge Ram 1500 and the 2011–2012 Ram 1500. It uses a dry filter inside a partial enclosure housing and comes with the inlet tube, mounting hardware, a steel heat shield and reinforced brackets.
AEM says its R&D testing and quality-first manufacturing support its claim that the intakes add torque and horsepower while delivering superior filtration. The kit suits Ram 1500 owners in the model years named in the Vehicle fitment section who want a dry-filter cold air intake.
Key features
- Cold air intake system with a dry filter
- Partial enclosure filter housing
- Inlet tube included
- Steel heat shield
- Reinforced brackets
- Complete hardware is included in every kit.
- The design is intended to add torque and horsepower and improve filtration.
Keeping the intake running well
Dust and debris are the main threats to a dry filter, so the intake works best when the surrounding area stays clean. Rinse the engine bay gently when it is cool, and keep the intake away from splashes. Check the filter at each oil change and replace it when light no longer passes cleanly through the pleats.
Heat soak can affect any cold air setup, so avoid routing the tube near exhaust parts. Tighten the bracket bolts after the first few drives, since road vibration can loosen them. Look at the cooling fan area during each inspection to make sure nothing has shifted into its path.
- Keep the filter dry and protected from splashes
- Tighten bracket bolts after initial drives
- Recheck the inlet tube connections at each service
- Confirm the heat shield is still in place
Specifications
| Brand | AEM |
|---|---|
| Part number | AEM21-8222DP |
| Intake system type | Cold air |
| Filter type | Dry |
| Filter housing type | Partial enclosure |
| Inlet tube | Included |
| Heat shield material | Steel |
| Fitment type | Direct fit |
| Warranty | Lifetime guarantee. |
Vehicle fitment
It fits the 2009–2010 Dodge Ram 1500 in the Laramie, SLT, ST, Sport, TRX and TRX4 trims, and the 2011–2012 Ram 1500 in the Big Horn, Express, Laramie, Laramie Longhorn, Outdoorsman, SLT, ST, Sport, Tradesman and Tradesman HD trims.
Ram 1500 model years outside 2009 to 2012, and Ram 2500 and 3500 models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting uses the hardware, reinforced brackets and steel heat shield supplied with the kit. Work with the engine off and cool, and keep hands clear of the cooling fan.
What’s included
The kit includes the inlet tube, complete hardware, a steel heat shield and reinforced brackets.









