Overview
The AEM 21-8104DC is a Brute Force air intake system with a dry filter, a partial enclosure housing and an aluminum intake tube. It is designed for use with a MAF sensor only, so verify your sensor type before buying.
AEM says its intakes are built for more torque and horsepower with better filtration. This kit includes complete hardware, a steel heat shield and reinforced brackets, and AEM backs it with a lifetime guarantee. It is 50 State CARB Approved.
Key features
- Dry filter with partial enclosure housing
- Steel filter housing with a black finish
- Aluminum intake tube in gunmetal gray powdercoat
- Steel heat shield and reinforced brackets
- 50 State CARB Approved
- Designed for MAF sensor applications only.
- Lifetime guarantee from AEM
Before you buy
A cold-air intake draws air from outside the engine bay rather than the hot space near the radiator, which is why it is often chosen for airflow changes. On a MAF-based system, the sensor measures incoming air, so the filter, tube and housing all need to seal properly for readings to stay steady. Look over the clamps and tube joints after the first drive, because a small leak can upset idle quality.
The dry filter in this kit should be inspected at each service and replaced when dirty or torn. Keep the housing closed and avoid washing the element unless it is designed for that. Heat shields and brackets help keep the tube away from exhaust components, so check their mounting points at regular intervals.
Specifications
| Brand | AEM |
|---|---|
| Part number | 21-8104DC |
| UPC | 840879014070 |
| Intake type | Cold air |
| Filter housing type | Partial enclosure in the summary; Open in the detail list |
| Filter type | Dry |
| Housing material | Steel |
| Housing finish | Black |
| Intake tube material | Aluminum |
| Intake tube finish | Gunmetal gray powdercoat |
| Inlet tube | Included |
| Emissions | 50 State CARB Approved |
| Sensor use | For MAF sensor only |
| Fitment type | Direct fit |
Vehicle fitment
No vehicle is named for the AEM 21-8104DC, and no fitment list is available for it. The product is designed for use with a MAF sensor only.
Make sure your vehicle’s year, model and trim match before ordering. Because this kit works only with a mass air flow sensor, confirm that your vehicle uses one.
Installation notes
Because the kit is for use with a MAF sensor only, confirm that your vehicle uses a mass air flow sensor before buying.
What’s included
The kit includes complete hardware, a steel heat shield, reinforced brackets and the inlet tube. The filter is a dry element in a partial enclosure housing.









