Overview
The Fabtech FTS7189 is a Performance Twin Tube shock absorber for the front position on vehicles with a 6 in. lift, with a 2.38 inch diameter hydraulic body, a 12.03 inch travel length and no reservoir.
The Performance Twin Tube is a hydraulic front shock with high velocity 9-stage valving and a closed cell foam insert. These are designed to give damping and reduce shock fade at higher speeds, and the shock works with Fabtech suspension systems for ride control. Confirm the collapsed and extended lengths before installation.
Key features
- Performance Twin Tube hydraulic shock
- 2.38 inch diameter body
- 9/16 inch chrome hardened piston rod and 1 3/8 inch OD piston
- High flow 9-stage valving
- Closed cell foam insert to reduce shock fade
- Lower mount S38 and upper mount ES35
- White powdercoat with blue Fabtech logo
- Front position, for a 6 in. lift
Choosing a twin tube shock
Twin tube hydraulic shocks use a pressure tube and a reserve tube inside one body, which keeps the damping steady on rough ground. Valving controls how firmly the shock resists compression and rebound, so it affects both trail comfort and on-road handling. A closed cell foam insert helps limit fade when the shock runs hot after long descents.
Before buying a shock for a lifted vehicle, measure the mount spacing and confirm the shock length fits the travel you need. Shocks are usually replaced in pairs on the same axle so that damping stays balanced side to side. Look for leaking fluid, worn bushings, bent mounts or a bouncy ride as signs the old shock has lost its control.
- Check mount bushings for cracks
- Watch for fluid seeping down the shock body
- Compare old and new lengths before installing
- Keep brake hoses clear of the shock body
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7189 (also shown as FABFTS7189) |
| UPC | 674866009011 |
| Product type | Shock absorber |
| Series | Performance Shock (Performance Twin Tube) |
| Position | Front |
| Lift height | 6 in. lift |
| Travel length | 12.03 in. |
| Collapsed length | 28.37 in. |
| Extended length | 16.34 in. |
| Lower mount | S38 |
| Upper mount | ES35 |
| Reservoir | No |
| Shock body | 2.38 inch diameter twin tube hydraulic |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Type | Hydraulic |
| Finish | White powdercoat with blue Fabtech logo |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct-fit front shock for a 6 in. lift. Confirm your vehicle’s year, model and trim before ordering.
Do not assume the shock suits a vehicle that has not been confirmed by the manufacturer. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension components affect handling and braking, so professional installation is recommended. Torque mounting hardware to the specification for your vehicle and follow standard service steps.
- Have the alignment checked after any suspension work.
- Check tire clearance and brake hose and wiring length through the full range of travel.
- Re-check fasteners after the first miles of driving.
- Check your local regulations on suspension height changes.
- Check the mount styles (S38 lower, ES35 upper) match the mounting points on your vehicle.
What’s included
One front shock.
Not included: Check the package contents against your installation before starting.








