Overview
The B&W Hitch RHXA2183 is a hitch reducer sleeve, part number BNWRHXA2183, that narrows a 3-inch by 3-inch receiver opening to 2-1/2 inches by 2-1/2 inches. The sleeve slides directly into the hitch receiver or onto the shank of a compatible accessory, letting a 2-1/2-inch accessory shank work in a 3-inch receiver.
Fit depends on your receiver and accessory dimensions rather than on a vehicle. Measure the receiver opening before choosing it, and confirm the reduced 2-1/2-inch size matches your accessory. It is universal fit.
Key features
- Reduces a 3-inch by 3-inch receiver opening to 2-1/2 inches by 2-1/2 inches
- Slides directly into the hitch receiver or onto an accessory shank
- Sized for a 2-1/2-inch accessory shank once reduced
- Universal fit, so no vehicle model applies
Measuring before you buy
A reducer sleeve narrows the receiver opening so a smaller shank can seat inside, which means the measurement that matters is the opening inside the receiver tube, not the vehicle. Use calipers or a tape across the square opening, and check the wall thickness if the sleeve feels tight. A loose fit can rattle and wear the metal, while a snug fit keeps the accessory steady under load.
Check the accessory’s shank size and pin hole location before fitting the sleeve. The pin must line up with the sleeve’s hole so the accessory locks in place. Inspect the sleeve for corrosion and cracks each season, and remove it when it no longer slides in cleanly.
- Receiver opening size
- Accessory shank size
- Pin hole alignment
- Corrosion and wear inspection
Specifications
| Brand | B&W Hitch |
|---|---|
| Part number | BNWRHXA2183 |
| Receiver opening | 3 in x 3 in |
| Reduced opening | 2-1/2 in x 2-1/2 in |
| Fitment | Universal fit |
Vehicle fitment
The manufacturer fitment list has no vehicles for this sleeve. Because it is a universal fit reducer, match it to your receiver size and accessory shank instead of a year, make or model.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.








