Overview
The Bushwacker Extend-A-Fender rear flares, part number B/W30042-02, are paintable rear fender flares for the 2014–2021 Toyota Tundra. They add 1.5 inches of coverage over the rear tires, helping oversize wheels and tires stay under control of the fender line on a truck used for serious off-road driving.
The flares use Bushwacker’s Dura-Flex 2000 flexible material, which the brand describes as durable, with built-in UV protection. They arrive in an OEM-style matte black finish and can be painted to suit the truck’s body color. Each set is a pair, covering both rear wheel openings.
Key features
- 1.5 inches of rear tire coverage for oversize tires
- Dura-Flex 2000 material, flexible and designed for added durability
- Built-in UV protection in the flare material
- Paintable, with an OEM-style matte black finish
- No drilling is required for installation.
- Supplied as a pair for both rear sides
Rear flare clearance on the Tundra
The rear wheel openings on a pickup carry the most load in rough driving, and a flare that sits close to the tire can pick up mud, rocks and debris. Check the gap between the tire and the flare edge at full steering lock, under load, and after any change in tire size or suspension height.
Rear wiring and the tail lamp area are the other concern. Route harnesses away from the flare edge and use the existing clips where possible. After the first few drives, check the flare for movement, since a loose edge will rattle and can rub paint off the fender.
- Recheck clearance after suspension work
- Keep rear harnesses clear of the flare edge
- Inspect the flare edge for rattles after drives
- Use the existing clips and fasteners where possible
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | B/W30042-02 |
| Position | Rear |
| Width/coverage | 1.5 inches |
| Quantity | Pair (two flares) |
| Material | Dura-Flex 2000 |
| Color | Paintable; OEM-style matte black finish |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list includes the 2014–2021 Toyota Tundra in the 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail trims. Each of those trims is covered by the list.
Earlier Tundra generations and other Toyota pickups, including the Tacoma, fall outside this fit. Match your year, model and trim to the coverage before ordering.
Installation notes
No drilling is needed, and installation can take only minutes. Check that each flare sits flush against the fender before final fastening. Because the flares sit close to the rear wiring and tail lamp area, disconnect the battery before fitting them.
What’s included
Two rear flares, supplied as a pair. Review the parts on hand before the first fitting.












