Overview
The Bushwacker 40001-01 is a pair of paintable front Extend-A-Fender flares for Chevrolet and GMC trucks that run oversized wheels and tires. Extend-A-Fender flares add tire coverage when a truck carries tires larger than its factory fenders were designed for, which helps protect the body from mud and debris. Added coverage can also help a truck meet local fender-coverage rules.
The flares are made from Bushwacker’s Dura-Flex 2000 material, which the company says has built-in UV protection and resists chalking, cracking and warping. They come in an OEM-style matte black smooth finish that is ready to paint, so they can be matched to the body color. The coverage width is rated at 1.75 inches, and the pair is sold as the front set.
Key features
- Extend-A-Fender design for added tire coverage with oversized tires
- Dura-Flex 2000 material with UV protection
- Resists chalking, cracking and warping.
- OEM-style matte black smooth finish, paintable
- Minimal drilling required for installation
- Made in the USA with a limited lifetime warranty
Painting and fender clearance
Extend-a-fender flares sit outboard of the factory fender lip, so their main job is covering a tire that sticks out past the body. Painting them is a bonding job first. Clean the flare with a degreaser, scuff the surface with a fine abrasive pad, and use a primer made for flexible plastic. A flexible topcoat keeps the color from cracking as the flare flexes with the fender.
Clearance matters as much as appearance. After mounting, turn the wheel to full lock and cycle the suspension through its travel while watching the tire edge against the flare. A taller or wider tire than the one planned can close that gap, so check again after any tire change.
- Test-fit before drilling
- Scuff and prime before topcoat
- Recheck clearance after tire changes
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 40001-01 |
| Position | Front |
| Quantity | Pair |
| Width and coverage | 1.75 inches |
| Finish | OEM matte black, paintable |
| Material | Dura-Flex 2000 |
| Warranty | Limited lifetime |
| Made in | USA |
| UPC | 90689100696 |
Vehicle fitment
The flare is sold for Chevrolet and GMC trucks with no model year or chassis code attached. Confirm the year, model and trim of your truck against the front flare dimensions before ordering.
Check the flare against your fender opening and tire size before installation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The flares install with minimal drilling. Paint them before installation if you want them to match the body, since they arrive in matte black.
What’s included
One pair of front Extend-A-Fender flares. The rear pair is a separate part, 40002-01, and the full set is 40900-01.









