Overview
The 30917-63 is a set of four OE style fender flares in Magnetic Gray Metallic, made for the 2016 to 2018 Toyota Tundra. The flares arrive pre-finished, and the color is intended to match the paint on the truck. Together they add up to 0.75 inches of tire coverage from debris at the front and rear.
The flares are built from Dura-Flex 2000, which Bushwacker describes as UV protected and warp-resistant. Each part is tailored to its application and made in the USA. The edge trim and stainless steel hardware are included already installed, so the fit is intended to be drill-free.
Key features
- Magnetic Gray Metallic finish applied at the factory
- Set of four front and rear flares
- Adds up to 0.75 inches of tire coverage from debris
- Pre-installed edge trim and stainless steel hardware
- The fit requires no drilling at all.
- 100 percent UV protected material that resists chalking
Comparing gray shades
Magnetic gray is a popular shade, but gray metallic finishes can read as cool or warm depending on the light and the color of the body around them. Look at the flare against the door and fender in daylight before committing. Compare under a few lighting conditions if possible.
This set is made for a specific year range, so check the truck’s model year before comparing shades. Once mounted, look over the edges where the flare meets the body, since gaps or uneven fit there can make a color difference more noticeable. Keep the finish clean with regular washing and a soft cloth.
Paint care matters on metallic gray. Avoid harsh solvents and abrasive cleaners, and use a non-abrasive polish to restore light sheen when needed.
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 30917-63 |
| UPC | 700008511661 |
| Position | Front and rear |
| Tire coverage | 0.75 inches |
| Quantity | Set of 4 |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | Magnetic Gray Metallic, pre-finished |
| Model years | 2016 to 2018 Toyota Tundra |
Vehicle fitment
The set fits only 2016 to 2018 Toyota Tundra models. Earlier years, including 2007 to 2013 and 2014 to 2015, are not a fit, so the set should not be installed on those trucks.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hardware is installed at the factory, so the main job is mounting the set to the truck. Compare the Magnetic Gray Metallic finish with your own paint before ordering, since shades of metallic gray can vary.
What’s included
A set of four pre-finished flares with edge trim and stainless steel hardware in place.












