Overview
The 30917-13 is a set of four OE style color matching fender flares for the 2016 to 2018 Toyota Tundra, finished in Super White. The flares come pre-finished to match the paint on a new truck, so the set is ready to install without a paint step. The set adds up to 0.75 inches of tire coverage from debris.
This rugged version of the OE style design comes with edge trim and stainless steel hardware already installed. The Dura-Flex 2000 material is made in the USA and resists warping, and each flare is tailored to its application. The flares mount without drilling, and the factory Super White finish means there is no wait for paint and no separate paint step.
Key features
- Pre-finished Super White color that matches a factory paint finish
- Edge trim and stainless steel hardware pre-installed
- Adds up to 0.75 inches of tire coverage from debris
- Installation requires no drilling, since the hardware is already in place.
- 100 percent UV protected Dura-Flex 2000
- Made in the USA
Before you mount
Fender flares cover the tire opening and keep road debris, mud and spray off the body panels as the tire moves through suspension travel. A color matched finish makes the truck look finished, but the surface still needs regular washing so grit does not wear it down over time. Flexible flare material tends to tolerate trail flex better than rigid material when it is mounted correctly.
Before mounting, clean the wheel wells and the body panels where the flares sit so the fasteners seat cleanly. Check that the tire clears the flare at full steering lock and at full suspension compression, since larger tires and lift changes can move the clearance. After the first few trail runs, look for loose fasteners, cracked edges or paint chips along the trim, and retighten or touch up as needed. Wheel alignment changes can also shift clearance, so recheck it after any suspension work.
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 30917-13 |
| UPC | 700008511601 |
| Position | Front and rear |
| Tire coverage | 0.75 inches |
| Quantity | Set of 4 |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | Super White, pre-finished |
| Model years | 2016 to 2018 Toyota Tundra |
Vehicle fitment
The set fits 2016 to 2018 Toyota Tundra models only. Earlier Tundra years, including 2007 to 2013 and 2014 to 2015, need a different part.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The edge trim and hardware arrive installed, so installation is mainly mounting the set to the truck, with no drilling involved.
What’s included
A set of four pre-finished Super White flares with edge trim and stainless steel hardware pre-installed.












