Overview
The Bushwacker 30916-02 is a set of four Extend-A-Fender flares for the 2007 to 2013 Toyota Tundra. The flares add tire coverage for oversize wheels and tires and are made from Dura-Flex 2000. The Base, Limited, Platinum and SR5 versions are included in this year range.
The flares add up to 1.63 inches of tire coverage from debris. The OEM-style matte black surface can be left in place or painted, and the material is UV protected to resist chalking. The flares install in minutes with no drilling. Extend-A-Fender flares cover more of the tire than the factory fender, which suits trucks on larger tires.
Key features
- Set of four Extend-A-Fender flares for front and rear positions
- Up to 1.63 inches of tire coverage from debris
- Installs in minutes with no drilling
- OEM matte black smooth finish that is easy to paint
- 100 percent UV protected Dura-Flex 2000 that resists chalking
- Made in the USA with a limited lifetime warranty
Coverage and clearance on the trail
Extend-A-Fender flares are designed to bring more of the tire under the body, which helps with rock and mud spray on larger tires. Coverage depends on tire width, wheel offset and suspension height, so the same flare can look different on different trucks. Check the gap between the flare edge and the tire at full steering lock before driving on rough ground.
Painting is simple with the right prep. Clean the surface, scuff it lightly and use a primer suited to flexible plastic before applying color. Keep the mounting points tight after the first few drives, and check the flare edges after each trail run for loose clips or shifting. Keeping the surface free of grit also helps the finish stay consistent over time.
- Check clearance at full steering lock
- Recheck coverage after a tire size change
- Clean the surface before painting
- Inspect edges after rough trail runs
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 30916-02 |
| UPC | 90689116741 |
| Position | Front and rear |
| Tire coverage | Up to 1.63 inches |
| Quantity | Set of 4 |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
| Model years | 2007 to 2013 Toyota Tundra |
Vehicle fitment
The flares fit 2007 to 2013 Toyota Tundra models. The 2014 to 2018 Tundra is not covered, so this set should not be used on those years.
Tundra model years from 2014 onward are outside this fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install needs no drilling and takes minutes. The set includes all four flares, so mount the front and rear pieces together for an even look.
What’s included
Four Extend-A-Fender flares, sold as a set of four.












