Overview
The Bushwacker 31906-01 is a set of four Extend-A-Fender flares for the 1989 to 1995 Toyota Pickup, covering the front and rear wheel openings. It adds 1.5 inches of width and tire coverage, which suits oversize wheels and tires. It fits the Base, DLX and SR5 pickups from those years.
The flares are made from Dura-Flex 2000, a material that resists chalking, cracking and warping. The OEM-style matte black smooth surface can be painted for a personalized look. The Extend-A-Fender design is meant for trucks running oversize wheels and tires that need more coverage than the factory fenders give. Installation needs only minimum drilling.
Key features
- Set of four flares for front and rear positions
- 1.5 inches of width and tire coverage
- Installs in minutes with minimum drilling
- Dura-Flex 2000 with built-in UV protection
- OEM-style matte black smooth finish that is easy to paint
- Made in the USA with a limited lifetime warranty
Oversize wheels and coverage
Extend-A-Fender flares widen the protected area over the tire without cutting the body. That makes them a practical choice when the tire is wider than the factory fender but the owner wants to keep the original sheet metal intact.
Coverage on an older pickup is only part of the picture. Suspension height, tire width and steering travel all affect whether the tire stays clear of the flare, so check those together before choosing a size or ride height.
Dura-Flex is a flexible material, which helps it absorb small impacts on the trail. Inspect the edges after heavy use, since fasteners can loosen when the flare flexes over rough terrain.
- Check tire width against the flare coverage
- Inspect edges after heavy trail use
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 31906-01 |
| UPC | 90689104342 |
| Position | Front and rear |
| Width and tire coverage | 1.5 inches |
| Quantity | Set of 4 |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
| Model years | 1989 to 1995 Toyota Pickup |
Vehicle fitment
It fits the 1989 to 1995 Toyota Pickup. The 1984 to 1988 pickups use a different Cut-Out set, and 1996 and later models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan for minimum drilling with this set, since it is not fully drill-free. Follow the instructions included with the set for hole placement.
What’s included
Four Extend-A-Fender flares for the front and rear. The front pair is part 31017-01 and the rear pair is part 31016-01.









