Overview
The Bushwacker 60002-01 is an Extend-A-Fender rear flare pair for the International Scout II. It is designed for a Scout running oversize wheels and tires, and it adds up to 1.5 in. of tire coverage against road debris. Confirm fit for your Scout’s year before ordering.
Installation needs only minimal drilling, and the flares go on in minutes. The OEM matte black smooth finish takes paint easily, and the Dura-Flex 2000 material is UV protected to resist chalking, cracking and warping. The front pair is part number 60001-01.
Extend-A-Fender flares extend the factory fender to cover larger tires, and the rear pair is listed to match the front pair, 60001-01.
Key features
- Adds up to 1.5 in. of tire coverage against road debris
- Rear flares sold as a pair
- Installs in minutes with minimal drilling
- OEM matte black smooth finish that paints easily
- Dura-Flex 2000 material with built-in UV protection
- Made in the USA, with a Limited Lifetime Warranty
Clearance and tire choice
Extend-a-fender flares work by moving the coverage edge outward, so they suit a Scout that runs wider wheels and tires. Tire width, wheel offset and suspension travel all affect whether the tread will rub the flare on bumps or in tight turns. Set the tire on the truck first, then check the gap at both ends of the flare while the axle is at full travel.
Rear flares also change how mud and rocks are thrown from the tire, so keep the inner fender liner in good condition and look for loose clips after each trip. If you run a bigger tire later, expect to recheck the flare fit, since changes in tread width can move the contact point.
- Measure tire clearance at full steering and full travel
- Check the inner liner and clips after each trip
- Recheck fit after changing wheel offset
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 60002-01 |
| UPC | 90689101105 |
| Vehicle | International Scout II (model years not stated) |
| Position | Rear |
| Sold as | Pair |
| Front pair part number | 60001-01 |
| Tire coverage | Up to 1.5 in. |
| Finish | OEM matte black, smooth, paintable |
| Material | Dura-Flex 2000, 100% UV protected |
| Installation | Minimal drilling |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
Confirm fit for your Scout’s year before ordering, since body shape and mounting points can differ from one year to the next.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only minimal drilling is called for, so mark the mounting points before you start. Keep the front pair (60001-01) on hand, since the two pairs are listed together for the same build.
What’s included
A pair of rear Extend-A-Fender flares. The front pair is a separate item under part number 60001-01.









