Overview
The Bushwacker Ford Pocket Style Fender Flare Set, part number 20917-02, is a set of four flares that adds up to 2.00 inches of tire coverage from debris. The flares are made for the Ford Super Duty. Check the year, model and trim against your truck before ordering.
Pocket Style flares carry recessed stainless steel bolts for a bolt-on look. The Dura-Flex 2000 material is molded thick and warp-resistant, and the surface is 100% UV protected so it will not chalk.
The OEM-style matte black finish can be left as it is or painted to match the body. The set installs easily, with no drilling required.
The flares are designed for the Ford Super Duty to complement oversized tires and high-clearance lift kits, which is the intended use for this set.
Tire coverage is how much of the tire the flare covers, so compare the 2.00-inch figure against the tire you intend to run.
Key features
- Four-flare set with up to 2.00 inches of tire coverage
- Installs easily with no drilling required
- Recessed stainless steel bolts for a bolt-on look
- 100% UV protected Dura-Flex 2000, no chalking
- OEM matte black finish that is easy to paint
Tire coverage and lift height
Tire coverage describes how far a flare reaches past the body line, but the tire is only covered when suspension and steering are considered too. A lift raises the body relative to the axles, which can change the position of the flare to the tire. Measure the flare position at ride height with the truck set up for its normal load, not on a bare frame or in a shop setup.
Pocket Style flares are a common choice for trucks running oversized tires. Before ordering, consider the tire width, the wheel offset, and whether the truck will carry a heavier load or a trailer. Inspect the bolts and flare edges after rough use, and touch up paint chips before they spread. Keep spare hardware in the glovebox so a missing bolt can be replaced quickly on the trail.
- Measure clearance at your real ride height
- Check tire width and wheel offset before ordering
- Inspect bolts and edges after rough trail use
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 20917-02 |
| UPC | 90689108036 |
| Quantity | Set of 4 |
| Position | Front and rear |
| Tire coverage | Up to 2.00 in |
| Material | Dura-Flex 2000 |
| Finish | OEM-style matte black, paintable |
| Front pair part number | 20055-02 |
| Rear pair part number | 20050-02 |
Vehicle fitment
It is made for the Ford Super Duty. Confirm the year, model and trim for your truck before mounting any flare in the set.
Confirm your vehicle’s year, model and trim before ordering. A Super Duty name alone does not show which model years these flares were made to fit.
What’s included
A set of four Pocket Style fender flares, front and rear.









