Overview
The Bushwacker 20043-02 is a cut-out front fender flare pair for the Ford Super Duty. Each set is designed for the truck to maximize off-road wheel travel and tire coverage, and the pair adds up to 4.5 in. of coverage against debris. Confirm the model years that fit your truck before ordering.
Cut-out flares are built for severe off-road use. They require cutting body sheet metal to reach full articulation and oversized-tire coverage, and removing the sheet metal gives a smoother appearance and greater strength when bolted on. The finish is OEM matte black, which can be left as-is or painted, and the Dura-Flex 2000 material is UV protected against chalking.
Key features
- Adds up to 4.5 in. of tire coverage against debris
- Sheet metal removal maximizes wheel articulation
- Stainless steel hardware for a bolt-on installation
- OEM matte black finish that can be painted
- Dura-Flex 2000 material, 100% UV protected
- Made in the USA, with a Limited Lifetime Warranty
Planning the cut
Cut-out flares are a permanent change, so plan the work before any sheet metal comes off. Measure the wheel and tire clearance at full articulation, mark the cut lines carefully, and test-fit the flare in stages. Trimming in small steps lets you stop when the fit is right instead of removing more metal than needed.
Once the metal is removed, the cut edges need protection. Bare steel rusts quickly, especially in wheel wells that collect mud and salt, so prime and paint the edges before the flare goes on. Inspect the seals and the flare edges after each off-road trip, and touch up chips as soon as they appear.
- Measure tire clearance at full steering lock and suspension travel
- Cut in stages and test-fit between each one
- Seal bare edges with primer and paint before installing
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 20043-02 |
| UPC | 90689105875 |
| Vehicle | Ford Super Duty (model years not stated) |
| Position | Front |
| Sold as | Pair |
| Rear part numbers | 20046-02 or 20044-02 |
| Tire coverage | Up to 4.5 in. |
| Style | Cut-out, sheet metal removed |
| Finish | OEM matte black, smooth, paintable |
| Material | Dura-Flex 2000, 100% UV protected |
| Hardware | Stainless steel |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
These cut-out flares are made for the Ford Super Duty. The cut-out fit depends on the exact truck, so confirm the year and body style before cutting anything.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting body sheet metal. Bushwacker refers to the installation guide for the specific model for the cut lines and steps, so read it before starting. Because the cut is permanent, check fit and clearance at each stage.
What’s included
A front pair of cut-out fender flares with stainless steel hardware. The rear pieces are sold as separate part numbers.









