Overview
The Bushwacker 31920-02 is a set of four pocket style fender flares for the 2005 to 2011 Toyota Tacoma. The flares cover the front and rear wheel openings and add 2 inches of tire coverage for oversized tires and high-clearance lift kits. It fits the Base and PreRunner versions of the Tacoma in those years.
Pocket style flares sit close to the body and are held on with recessed stainless steel bolts. The install needs only minimal drilling. The surface is UV protected and resists chalking, and the matte black finish can be painted to match or accent the body color. The flares are made from thick, warp-resistant Dura-Flex 2000 built for durability and flexibility on the trail.
Key features
- Pocket style design for front and rear positions
- 2 inches of tire coverage
- Recessed stainless steel bolts for a secure bolt-on look
- Minimal drilling needed for installation
- Dura-Flex 2000 material with UV protection
- OEM-style matte black finish that is easy to paint
Fitting and checking clearance
Pocket style flares sit closer to the body than flat flares, which keeps the outline tidy but leaves less room for error at the mounting points. Lay the flare against the fender before drilling and confirm it clears the tire when the wheel is turned lock to lock. Lift height changes the fit too, so the same flare can sit differently on a stock truck and on a lifted one.
Dura-Flex is a flexible material, which helps the flare absorb small impacts without cracking. Still, a flare that is pulled tight against an uneven fender will stress its edges over time. Set each flare evenly, snug the hardware in a cross pattern, and avoid overtightening the recessed bolts, since the threads can strip in the plastic mounting area.
- Test-fit before any holes are marked
- Check the rear edge at full compression
- Keep spare bolts and washers in one labeled bag
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 31920-02 |
| UPC | 90689107572 |
| Position | Front and rear |
| Width and tire coverage | 2 inches |
| Quantity | Set of 4 |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
| Model years | 2005 to 2011 Toyota Tacoma |
Vehicle fitment
It fits the 2005 to 2011 Toyota Tacoma. The 2012 and later Tacoma generations fall outside this fitment, so confirm the year and generation before using this set on them.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front pair is part 31053-02 and the rear pair is part 31052-02, for buyers who need to order the halves separately.
What’s included
Four pocket style fender flares for the front and rear positions.









