Overview
The Bushwacker Cut-Out Style rear flare pair, part 10036-07, is made for the rear of the Jeep Cherokee XJ. Each set is designed for the vehicle to maximize off-road wheel travel while keeping tire coverage. The pair adds 3.5 inches of width and tire coverage and fits 1984 to 2001 Jeep Cherokee XJ models.
Cut-Out flares require cutting body sheet metal to reach maximum articulation and tire coverage. The result is a smoother appearance and more strength than a generic flare. They are molded from thick, warp-resistant Dura-Flex 2000 TPO with UV protection against chalking, and the matte black finish can be left as is or custom painted.
Key features
- Individually designed for the Jeep Cherokee to maximize wheel travel
- 3.5 inches of tire coverage from debris
- Sheet metal removal maximizes wheel articulation
- Tough stainless steel hardware for a bolt-on fit
- 100% UV protected Dura-Flex 2000 TPO with warp-proof construction
- OEM matte black finish that can be custom painted
Clearance and articulation
Rear flares on an XJ shape the way the tire sits in the wheel opening, so the choice of tire size and suspension height matters. Larger tires can reach the flare edge at full steering lock or during compression, so check clearance after mounting. Look at the bump stops, shock mounts and the inner fender for contact points that could cause rubbing.
Because cut-out designs remove part of the body sheet metal, the exposed edges are a place to watch for surface rust. Sealing and touching up bare metal helps prevent corrosion. A matched paint finish on the flares can make them blend with the body, and a light sanding of the edges before paint improves adhesion.
- Check clearance at full steering lock
- Watch bump stops and shock mounts for contact
- Seal bare metal edges to prevent rust
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10036-07 |
| UPC | 90689112156 |
| Position | Rear |
| Quantity | Pair |
| Width and coverage | 3.5 inches |
| Material | Dura-Flex 2000 TPO |
| Finish | OEM matte black, paintable |
| Set part number | 10911-07 |
| Fitment type | Direct fit |
Vehicle fitment
The rear pair fits 1984 to 2001 Jeep Cherokee (XJ) models, including Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.
The list covers the Cherokee XJ only, so the Cherokee KL and XL, the Grand Cherokee and the Wrangler are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Cut-Out design requires sheet metal removal at the rear wheel openings, so plan for cutting and check the installation guide for your specific model before starting. Confirm the rear clearance at full suspension travel after mounting.
What’s included
The rear Cut-Out pair is sold as part 10036-07. The front pair is part 10035-07, and the full set is part 10911-07.









