Select your vehicle

Bushwacker Chevrolet Silverado Extend-A-Fender Flare Set (Paintable) – 40964-02

Bushwacker

Shop Bushwacker Fender Flares on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Extend-A-Fender flare set for the Chevrolet Silverado, four pieces, front and rear
  • Adds 1.75 inches of width and tire coverage for oversize wheels and tires
  • Dura-Flex 2000 with a paintable OEM-style matte black smooth finish
  • Minimal drilling for a quick install
  • Part number 40964-02, UPC 70000699894

Description

Overview

This is a set of four Extend-A-Fender flares for the Chevrolet Silverado, made for oversize wheels and tires that need more tire coverage than the factory fenders provide. The set covers the front and rear and adds 1.75 inches of width and tire coverage.

Extend-A-Fender flares are made from Dura-Flex 2000, a material that resists chalking, cracking and warping. The OEM-style matte black finish can be kept for a clean look or painted for a personalized finish. Installation needs minimal drilling, and the set is made in the USA.

Key features

  • Set of four flares for front and rear positions
  • 1.75 inches of width and tire coverage
  • Minimal drilling required for installation
  • OEM-style matte black smooth finish that is easy to paint
  • 100 percent UV protected Dura-Flex 2000 with built-in protection
  • Limited lifetime warranty from Bushwacker

Oversize tires and fit

Oversize tires push the tread out past the factory fender line, and a flare that adds coverage helps the wheel opening look finished while reducing spray onto the lower body. Plastic flares suit this job because they resist chalking and cracking better than bare painted panels in sun and road grime.

Before buying, measure the distance from the tire edge to the stock fender at full steering lock and at full suspension travel. Mount the flares with the truck on level ground so the gap is even on both sides, then recheck the fasteners after the first few trail runs.

  • Measure tire clearance before choosing wheels
  • Keep the mounting hardware in a labeled bag
  • Inspect the edges after rough or muddy trips

Specifications

Brand Bushwacker
Part number 40964-02
UPC 70000699894
Position Front and rear
Width and tire coverage 1.75 inches
Quantity Set of 4
Fit type Direct fit
Material Dura-Flex 2000
Finish OEM matte black, paintable

Vehicle fitment

The set is made for the Chevrolet Silverado. Confirm the model years and trims that fit your truck before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Confirm the year, model and trim of your Silverado before ordering.

What’s included

Four Extend-A-Fender flares for the front and rear. The front pair is part 40125-02 and the rear pair is part 40128-02.

SKU: B/W40964-02 Category:

Specification

Shipping weight 20.60 lbs
Package dimensions 49.00 × 32.00 × 10.00 in
brands

Questions & Answers

Is 40964-02 a set of four flares?

Yes. The set is a four-piece kit with front and rear positions. The front pair is 40125-02 and the rear pair is 40128-02.

How much width do the flares add?

Bushwacker lists 1.75 inches of width and tire coverage for this Extend-A-Fender set. The flares are meant for oversize wheels and tires.

Does this set need drilling?

The install needs minimal drilling, so it is not fully drill-free. Follow the instructions supplied with the set for hole placement.

Which Silverado years does this set fit?

Confirm fit for your vehicle's year, model and trim before ordering. The set is made for the Chevrolet Silverado, with front and rear positions and 1.75 inches of width and tire coverage.

What tools are usually needed for a drill-minimal install?

A drill with bits sized for the mounting holes, a tape measure and a torque wrench are typical. Mark each hole location before drilling, and check the flare position against the body from several angles first.

Can I paint the flares myself?

Yes, the matte black surface can be painted. Clean and scuff the flare, apply a primer suited to plastic, and let each coat dry before fitting. Paint the flares before mounting them to avoid overspray on the truck.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Bushwacker Fender Flares on Amazon