Overview
The Bushwacker 40086-02 is a Boss Pocket Style fender flare for the rear of the 2007 to 2013 GMC Sierra 1500. The Boss Pocket Style uses surface-mounted stainless steel bolts and has a bold look. It is a rear-position flare built for that model range.
The flares are custom-designed for the GMC Sierra to complement oversized tires and high-clearance lift kits. They are made in the USA from thick, warp-resistant Dura-Flex 2000. The OEM-style matte black finish is UV protected and resists chalking, and it can be painted to match or accent the body color.
Key features
- Boss Pocket Style design with surface-mounted stainless steel bolts
- Rear position
- Installs with only minimal drilling required, per the manufacturer
- Dura-Flex 2000 that is made in the USA
- OEM-style matte black finish that is easy to paint
- UV protected to prevent chalking
Boss flare install planning
A rear fender flare works best when the body line behind the wheel is clean and the rear quarter is free of gaps. Look at the rear wheel opening and the flare edge together, and make sure the flare follows the body curve before any hole is marked. Suspension height and tire width both change how far the flare sits from the tire.
Surface-mounted bolts keep the flare clear of the body panel, which makes the bold look easier to achieve but places more visible load on the hardware. Check that each bolt sits flat and seats evenly, and avoid overtightening into the plastic. Recheck them after the first few drives and whenever the truck has been on rough roads.
A Boss flare can be painted to match the body, or left matte black for a blackout style. Prep the surface first and mask the bolt heads, so the finish stays clean around the hardware.
- Check the rear edge for an even gap
- Keep bolt heads clean and tight
- Prep the surface before painting
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 40086-02 |
| UPC | 90689112910 |
| Position | Rear |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
| Model years | 2007 to 2013 GMC Sierra 1500 |
Vehicle fitment
Fits the 2007 to 2013 GMC Sierra 1500 in the Denali, Hybrid, SL, SLE, SLT, WT and XFE versions. The 2014 and later Sierra and the Sierra 2500 HD and 3500 HD are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install takes minutes with only minimal drilling. Mark the hole locations against your own truck before drilling, and follow the installation steps supplied with the flares.
What’s included
This product is one rear flare, so check the package contents against your installation before starting.









