Overview
The Bushwacker Ford/Lincoln Extend-A-Fender Flare Set, part number 20915-02, is a set of four flares for the front and rear of the 2004-2008 Ford F-150 and the 2006-2008 Lincoln Mark LT. The listed width/coverage is 2 inches, which gives extra tire coverage to trucks running oversize wheels and tires.
Extend-A-Fender flares are built from Bushwacker’s Dura-Flex 2000 material, which the company describes as resistant to chalking, cracking and warping. The OEM-style matte black smooth finish can stay as it is or be painted for a custom look.
The installation needs no drilling and takes only minutes, which makes the set quick to mount on an F-150 or Mark LT.
The F-150 entry is the main vehicle in this list, and the Lincoln Mark LT appears as a shorter entry.
Coverage is listed at 2 inches for the set, which is the figure to compare with the tire width before choosing it for an F-150 running oversize tires.
The flares install in minutes with no drilling, so the mounting is quick and clean.
Key features
- Four flares: front and rear pairs
- 2 inches of width/coverage
- Installs neatly in minutes with no drilling
- Dura-Flex 2000 material with built-in UV protection
- Smooth OEM matte black finish, easy to paint
- Made in the USA with a Limited Lifetime Warranty
Coverage and tire fit
Extend-A-Fender designs add to the coverage of the existing body rather than replacing the fender. That means the factory fender and bumper still set the limits, and the flare works within them. Measure the tire width and the full ride height first, then compare with the 2-inch coverage of the set to see whether the tire will sit inside the flare.
Trucks running larger tires should check clearance at full steering lock and at full suspension compression, since both move the tire relative to the body. Recheck after any lift or tire change. Keep the mounting hardware snug and inspect the flare edges after the first trail runs, because a loose flare can rub and wear paint.
- Measure tire width at your actual ride height
- Check clearance at full lock and full compression
- Retighten hardware after the first trail runs
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 20915-02 |
| UPC | 90689107084 |
| Quantity | Set of 4 |
| Position | Front and rear |
| Width/coverage | 2 in |
| Material | Dura-Flex 2000 |
| Finish | OEM-style matte black, smooth, paintable |
| Front pair part number | 20051-02 |
| Rear pair part number | 20052-02 |
Vehicle fitment
It fits the 2004-2008 Ford F-150, in trims including FX2, FX4, King Ranch, Lariat, Limited, STX and XLT, and the 2006-2008 Lincoln Mark LT in its Base trim.
The list does not cover the 2009 and later F-150, and the Lincoln Mark LT is listed only through 2008. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A set of four Extend-A-Fender flares, front and rear.









