Overview
The Bushwacker 40014-01 is a pair of rear Extend-A-Fender flares for Chevrolet and GMC trucks that run oversized wheels and tires. The Extend-A-Fender style adds bolt-on width over the rear tires, which protects the body when the tire is larger than the factory fender opening. The flares can also help meet local fender-coverage laws.
Each flare is made from Bushwacker’s Dura-Flex 2000 material, which the company describes as designed for durability and flexibility, with built-in UV protection. The flares resist chalking, cracking and warping, and the OEM-style matte black finish can be left as is or painted. The coverage is rated at 2.5 inches, and the pair is sold as the rear set.
The front pair is sold under part number 40013-01. The flare arrives in the OEM-style matte black finish, and the Dura-Flex 2000 material is built for durability and flexibility.
Key features
- Extend-A-Fender design for added rear tire coverage
- 2.5 inches of width and coverage
- Dura-Flex 2000 material with built-in UV protection
- Resists chalking, cracking and warping
- OEM-style matte black smooth finish, paintable
- Requires only minimal drilling
Fitting oversized rear tires
Rear flares become important once tires grow past the fender opening, because the tire can rub on the body during suspension travel and steering. Measure the gap between the tire and the flare at full compression before deciding how much coverage is needed. Coverage needs change with tire width and the amount of lift on the truck. Tire pressure also affects how much the sidewall bulges, so keep it consistent.
Bolt-on flares depend on sound mounting points, so inspect the fasteners and the body panel after the first few drives. Look for loosened clips, cracked paint near the mounts and any rubbing marks on the flare edge. Address rubbing early, since a flare that moves can damage the paint underneath.
- Check tire clearance after changing wheel offset
- Recheck fastener torque after the first off-road outing
- Clean road grime from the flare edge regularly
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 40014-01 |
| Position | Rear |
| Quantity | Pair |
| Width and coverage | 2.5 inches |
| Finish | OEM matte black, paintable |
| Material | Dura-Flex 2000 |
| Installation | Minimal drilling |
| UPC | 90689100801 |
Vehicle fitment
Confirm the year, model and trim of your Chevrolet or GMC truck before ordering, since the flare is sold for trucks with oversized wheels and tires.
Check the rear wheel opening and tire size against the flare before drilling. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bushwacker says these flares need only minimal drilling. Test-fit the flare on the truck before drilling, and paint it first if you want a matched color.
What’s included
One pair of rear Extend-A-Fender flares. The front pair is part 40013-01.








