Overview
The Bushwacker Cut-Out Style front fender flare pair, part 10035-07, is made for the Jeep Cherokee XJ. Cut-Out flares are individually designed for each model. This pair adds 3 inches of tire coverage from debris while maximizing off-road wheel travel. The Cherokee XJ was built from 1984 to 2001, and this pair fits those model years.
Cut-Out flares need body sheet metal removed to reach maximum articulation and coverage for oversized tires, so this is a more involved install than the bolt-on styles. The flares are made from thick, warp-proof Dura-Flex 2000 TPO. The material is UV protected, so the matte black finish will not chalk, and the pair can be custom painted.
Key features
- Individually designed for the Jeep Cherokee XJ
- 3 inches of tire coverage from debris
- Sheet metal removal maximizes wheel articulation
- Stainless steel hardware for a bolt-on installation once the sheet metal is cut
- 100% UV protected Dura-Flex 2000 TPO that resists warping
- OEM matte black finish that can be painted
Sheet metal cutting considerations
Cut-out flares change the body, so the work needs planning before any cutting starts. Mark the cut lines carefully, check the wheel and tire clearance at full articulation, and confirm the fuel and brake lines and wiring are clear of the cut area. Once the sheet metal is removed, the exposed edges need protection so they do not rust.
After installation, inspect the cut edges, seams and fasteners regularly, especially after deep water or rough trails. Keep the flare clean of mud and check steering and suspension travel with the tires mounted. Oversized tires, lift components and steering changes all affect clearance, so recheck the fit after any change to them.
- Mark cuts before cutting
- Check fuel and brake line routing
- Seal and paint bare metal edges
- Recheck clearance after tire changes
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10035-07 |
| UPC | 90689112149 |
| Position | Front |
| Quantity | Pair |
| Width and coverage | 3 inches |
| Material | Dura-Flex 2000 TPO |
| Finish | OEM matte black, paintable |
| Set part numbers | 10912-07 or 10911-07 |
| Fitment type | Direct fit |
Vehicle fitment
This pair is for the 1984 to 2001 Jeep Cherokee (XJ).
The XJ is a different vehicle from the Grand Cherokee ZJ and WJ and the Liberty KJ, so those models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cut-Out flares require cutting body sheet metal to reach the articulation and tire coverage they are designed for, so this is not a no-cut installation. Follow the installation guide for the specific Cherokee model and confirm the flare clearance at full steering lock before driving.
What’s included
A pair of front Cut-Out flares. The rear pair is part 10036-07, and the full set part numbers are 10912-07 or 10911-07.









