Overview
The Bushwacker 10911-07 is a cut-out style front and rear fender flare set for the Jeep Cherokee XJ, written for 4-door models. Bushwacker designs the set for extreme off-road use to maximize wheel travel and keep tire coverage, and it provides 5 in. of coverage against debris. The product name identifies the XJ Cherokee, which places this set in the 1984 to 2001 range.
The cut-out design requires cutting body sheet metal to reach full articulation for oversized tires. The custom fit gives a smoother appearance and more strength than a standard flare, with stainless steel hardware for a bolt-on installation. The OEM matte black finish is UV protected and can be left black or painted to match the body.
Key features
- Provides 5 in. of tire coverage against debris
- Written for 4-door models
- Exclusive bold pocket design and style
- Complete with stainless steel hardware
- OEM matte black finish that can be painted
- Dura-Flex 2000 TPO, UV protected
Before cutting the body
Cut-out flares are a bigger step than a bolt-on fender. Once the sheet metal is removed, the flare becomes part of the body shape, and a bad cut is hard to undo. Mark the lines with painter’s tape and confirm clearance at full suspension travel before the first cut is made.
For a 4-door XJ, the rear section and tire position matter most. Oversized tires push against the flare sooner than stock sizes, so check the front and rear sections separately. Any lift or axle change should be followed by a fresh fit check before the install is considered finished.
- Tape out cut lines before cutting
- Test fit both sections before final mounting
- Recheck clearance after any lift or tire change
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10911-07 |
| UPC | 90689106056 |
| Vehicle | Jeep Cherokee XJ, 4-door models |
| Position | Front and rear |
| Sold as | Set |
| Tire coverage | 5 in. |
| Style | Cut-out, pocket design |
| Finish | OEM matte black, smooth, paintable |
| Material | Dura-Flex 2000 TPO, UV protected |
| Hardware | Stainless steel |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
This set is for the Jeep Cherokee XJ, 1984 to 2001, in 4-door form. The CJ Series is a different body and is not covered by the XJ name. Two-door Cherokees fall outside this 4-door fitment.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cut-out design requires cutting body sheet metal, so the install is not a simple bolt-on. Bushwacker points to the installation guide for the specific model for the cut lines and mounting steps.
What’s included
A front and rear set of cut-out style flares with stainless steel hardware.












