Overview
The Bushwacker 40051-02 is a pair of cut-out front fender flares for Chevrolet Silverado and GMC Sierra trucks. Bushwacker designs each set to suit the truck it is sold for, so the flares can clear a larger tire while keeping the wheel free to articulate. The cut-out design requires the body sheet metal to be trimmed, which is the trade-off for the extra travel.
The flares are made from Dura-Flex 2000 material, which Bushwacker says is warp-proof and has UV protection against chalking. The finish is an OEM matte black that is intended for painting. The coverage is rated at 2.75 inches, and the pair is sold as the front set.
The rear pair is part 40052-02. The cut-out design gives maximum wheel articulation for oversized tires, and the Dura-Flex 2000 material is the same across the front and rear pairs of this design.
Key features
- Cut-out design for maximum wheel articulation
- Individually designed for Silverado and Sierra trucks
- 2.75 inches of width and coverage
- Dura-Flex 2000 material with UV protection
- Stainless steel bolt-on hardware.
- OEM matte black finish, paintable
Choosing a cut-out setup
Cut-out flares are chosen for the body they will cover. The main trade-off is the amount of sheet metal removed against the wheel travel gained, so the setup should match the truck’s tire size and the kind of driving planned. Trail-focused builds may accept more trimming, while daily drivers often need a more modest setup that still clears the tire.
Front cut-out flares affect the steering arc and the front suspension, so the wheel should be checked through full lock and full compression. Related parts often replaced at the same time include the tires, the bump stops and the shock mounts, since they set the amount of space the tire can use. Confirm all clearances with the setup in place before finishing.
- Match the trim to tire size
- Check steering arc at full lock
- Review bump stops and shock mounts
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 40051-02 |
| Position | Front |
| Quantity | Pair |
| Width and coverage | 2.75 inches |
| Installation | Requires cutting body sheet metal |
| Material | Dura-Flex 2000 |
| UPC | 90689106421 |
Vehicle fitment
These flares are sold for Silverado and Sierra trucks as a general fit, so confirm the year, model and trim of your truck before ordering.
Check the flare against your fender opening and planned tire size before cutting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cut-out flares require trimming body sheet metal, so review the installation steps for your model before starting. The bolt-on hardware is stainless steel.
What’s included
One pair of front cut-out flares. The rear pair is part 40052-02.









