Overview
The Bushwacker 40949-02 is a Cut-Out fender flare set for the Chevrolet Silverado, covering the front and rear. It adds 2.5 inches of width and tire coverage. The set is designed to maximize off-road wheel travel while keeping tire coverage.
Cut-Out flares require cutting body sheet metal, which lets the tire move further in the wheel opening. This gives the truck a smoother appearance and added strength, with stainless steel hardware for a bolt-on installation. The flares are made from thick Dura-Flex 2000, and the matte black finish can be painted.
Key features
- Cut-Out design for maximum wheel articulation
- 2.5 inches of width and tire coverage
- Set of four for the front and rear
- Tough stainless steel hardware for a bolt-on installation
- Dura-Flex 2000 with UV protection that resists chalking
- Matte black finish that can be painted
Before you cut the body
Cut-out flares change the shape of the wheel opening, so planning matters before any work begins. Sheet metal removal is permanent, and a wrong measurement cannot be undone. Mark the cut lines with the wheels and tires at the ride height you normally run, and check that the tire clears the flare through full suspension travel. Front and rear clearance should be checked separately, since each end of the truck can sit differently.
Wider wheel travel also exposes more of the inner fender to mud and rock. Inspect the cut edges and mounting points after rough trail runs. Bare steel at a cut should be cleaned and sealed to limit rust, and any damaged paint should be treated before the flare is bolted back on.
- Mark cut lines with the wheels at your normal ride height
- Check tire clearance through full suspension travel
- Seal bare cut edges to limit surface rust
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 40949-02 |
| UPC | 90689112491 |
| Position | Front and rear |
| Width and tire coverage | 2.5 inches |
| Quantity | Set of 4 |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
| Model years | 2007 to 2013 Silverado 1500; 2007 to 2014 Silverado 2500 HD and 3500 HD |
Vehicle fitment
It fits the 2007 to 2013 Chevrolet Silverado 1500 in the LS, LT, LTZ and WT versions, and the 2007 to 2014 Silverado 2500 HD and 3500 HD in the LT, LTZ and WT versions. For 2014 and later Silverado 1500 trucks, confirm fit for your year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cut-Out flares require cutting body sheet metal, and the cut is permanent. Bushwacker refers to an installation guide for each specific model, so follow that guide before making any cut.
What’s included
A set of four Cut-Out fender flares for the front and rear. The front pair is part 40097-02 and the rear pair is part 40092-02.









